Linear and Nonlinear Fracture Mechanics

All Items

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  Requires Subscription PDF Requires Subscription Visual Abstract

  26-53

• Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially

  Yousria Boulmaali-Hacene Chaouche, Nadia Kouider, Kamel Djeghaba, Bachir Kebaili

  Requires Subscription PDF Requires Subscription Visual Abstract

  91-106

• Failure analysis of compressed earth block using numerical plastic damage model

  Samir Bouhiyadi, Laidi Souinida, Youssef El hassouani

  Requires Subscription PDF Requires Subscription Visual Abstract

  634-659

• Hybrid phase-field modeling of multi-level concrete gravity dam notched cracks

  Hichem Mazighi, Mustapha Kamel Mihoubi, David Santillan Sanchez

  Requires Subscription PDF Requires Subscription Visual Abstract

  154-175

• Flexural behavior of delta and bi-delta cold-formed steel beams: experimental investigation and numerical analysis

  Yazid Hadidane, Nadia Kouider, Mohammed Benzerara

  Requires Subscription PDF Requires Subscription Visual Abstract

  69-88

• Finite Fracture Mechanics and Cohesive Crack Model: Size effects through a unified formulation

  Francesco Ferrian, Pietro Cornetti, Liviu Marsavina, Alberto Sapora

  Requires Subscription PDF Requires Subscription Visual Abstract

  496-509

• Effect of beam-column joints flexibility on the seismic response of setback RC buildings designed according to the Algerian seismic code

  Abdallah Yacine Rahmani, Said Hicham Boukhalkhal, Mohamed Badaoui

  Requires Subscription PDF Requires Subscription Visual Abstract

  394-409

• Experimental and numerical assessment of the location-based impact of grouting defects on the tensile performance of the fully grouted sleeve connection

  Espoir Kahama, Xie Fuzhe, Chunhua Lu, Isaac Offei

  Requires Subscription PDF Requires Subscription Visual Abstract

  437-460

• Predictive Modelling of Creep Crack Initiation and Growth using Extended Finite Element Method (XFEM)

  Meor Iqram Meor Ahmad, Mohd Anas Mohd Sabri, Mohd Faizal Mat Tahir, Nur Azam Abdullah

  Requires Subscription PDF Requires Subscription Visual Abstract

  119-129

• Web post-buckling strength of thin-webbed cellular beams using carbon PFRP profiles

  Hamda Guedaoura, Yazid Hadidane

  Requires Subscription PDF Requires Subscription Visual Abstract

  43-61

• Fatigue crack growth analysis of welded bridge details

  Danilo D'Angela, Marianna Ercolino

  Requires Subscription PDF Requires Subscription Visual Abstract

  265-272

• Numerical analysis of bonded composite patch efficiency in the case of lateral U and V-notched aluminium panels

  Mohammed A. Bouchelarm, Abdelkader Boulenouar, Meriem Chafi

  Requires Subscription PDF Requires Subscription Visual Abstract

  62-72

• Elastic surface crack interaction and its engineering critical assessment within the framework of fitness-for-service standards

  Gabriel de Castro Coêlho, Dr. Antonio Almeida Silva, Dr. Marco Antonio dos Santos

  Requires Subscription PDF Requires Subscription Visual Absract

  134-145

• 3D crack identification using the Nelder-Mead Simplex algorithm combined with a random generation of crack positions

  Nasreddine Amoura, Hocine Kebir; Abdelouahab Benzerdjeb

  Requires Subscription PDF Requires Subscription Visual Abstract

  243-255

• The critical influence of some “tiny” geometrical details on the stress field in a Brazilian Disc with a central notch of finite width and length

  Stavros K Kourkoulis, Christos Markides, Ermioni Pasiou, Andronikos Loukidis, Dimos Triantis

  Requires Subscription PDF Requires Subscription Visual Abstract

  405-422

• Elastic-plastic fracture analysis of anisotropy effect on AA2050-T84 alloy at different temperatures: A Numerical Study

  Krishnaraja Kodancha, Nagaraj Ekabote, P P Revankar

  Requires Subscription PDF Requires Subscription Visual Abstract

  78-88

• Reliability assessment of the behavior of reinforced and/or prestressed concrete beams sections in shear failure

  Karim Benyahi, Mohand Said Kachi, Youcef Bouafia, Salma Barboura, Jia Li

  Requires Subscription PDF Requires Subscription Visual Abstract

  195-222

• Strain Energy Density as Failure Criterion for Quasi-Static Uni-axial Tensile Loading

  Andrea Kusch, Simone Salamina, Daniele Crivelli, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  331-349

• Stress intensity factors for mixed-mode crack growth in imitation models under biaxial loading

  Rustam Yarullin, V.N. Shlyannikov, I.S. Ishtyriakov, M.M. Yakovlev

  Requires Subscription PDF Requires Subscription Visual Abstract

  210-222

• Plastic stress intensity factor behavior at small and large scale yielding

  Alexander Zakharov, Valery Shlyannikov, Anastasia Tartygasheva

  Requires Subscription PDF Requires Subscription Visual Abstract

  223-235

• Double initial and caustic curves in diametrically compressed transparent discs - Application to the contact length

  Christos Markides

  Requires Subscription PDF Requires Subscription Visual Abstract

  451-470

• Stress Intensity Factor Solutions for CTS Mixed Mode Specimen

  Fernando Ventura Antunes, Ricardo Branco, José António Martins Ferreira, Luís Borrego

  Requires Subscription PDF Requires Subscription Visual Abstract

  676-692

• Fatigue crack growth in notched specimens: a numerical analysis

  Fernando Ventura Antunes, Ricardo Branco, Pedro Prates, José Domingos Costa

  Requires Subscription PDF Requires Subscription Visual Abstract

  666-675

• Stress Intensity Factor Equations for the Evolution of Surface and Corner Cracks to Through Cracks

  Antonio Miranda, Rafael Marques, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro

  Requires Subscription PDF Requires Subscription Visual Abstract

  611-629

• Evaluation of mixed mode (I/II) notch stress intensity factors of sharp V-notches using point substitution displacement technique

  Mirzaul Karim Hussain, K.S.R.K. Murthy

  Requires Subscription PDF Requires Subscription Visual Abstract

  599-610

• Limit load based evaluation of plastic η factor for C(T) specimen with a mismatched weld

  R Nikhil, S A Krishnan, G Sasikala, A Moitra

  Requires Subscription PDF Requires Subscription Visual Abstract

  523-529

• Finite Element Analysis of Interactions of between two cracks in FGM notched Plate under Mechanical Loading

  Aboubakar Seddik Bouchikhi, Abdelkader Lousdad, Khalfi Yassine, Nasser Eddine Bouida, Sadek Gouasmi, Abdelkader Megueni

  Requires Subscription PDF Requires Subscription Visual Abstract

  174-192

• Numerical Comparison of Cruciform weld and Butt weld simulation and a Study of Fracture Mechanics on Two Types of Welds

  Benattou Bouchouicha, Malika Tirenifi, El Bahri Ould Chikh, Ahmed Bensari

  Requires Subscription PDF Requires Subscription Visual Abstract

  357-369

• The crack path in fuselage panel under mixed mode biaxial loading

  Alexander Zakharov, Valery Shlyannikov, Andrey Tumanov

  Requires Subscription PDF Requires Subscription Visual Abstract

  87-96

• The effect of low-cycle fatigue on evolution of fracture mechanics parameters in residual stress field caused by cold hole expansion

  Yury Matvienko, Vladimir Pisarev, Svyatoslav Eleonsky

  Requires Subscription PDF Requires Subscription Visual Abstract

  303-320

• Brittle crack propagation acceleration in a single crystal of a 3% silicon-Fe alloy

  Tomoya Kawbata, Noritaka Nakamura, Shuji Aihara

  Requires Subscription PDF Requires Subscription Visual Abstract

  416-424

• Analytical and numerical study of the stress field in a circular semi- ring under combined diametral compression and bending

  Stavros K Kourkoulis, Ermioni D. Pasiou, Christos F. Markides

  Requires Subscription PDF Requires Subscription Visual Abstract

  247-265

• Mechanical and fracture properties of particleboard

  Liviu Marsavina, Ion Octavian POP, Emanoil LINUL

  Requires Subscription PDF Requires Subscription Visual Abstract

  266-276

• Novel weight functions and stress intensity factors for quarterelliptical cracks in lug attachments

  S. Akbari, S. M. Nabavi, H. Moayeri

  Requires Subscription PDF Requires Subscription Visual Abstract

  39-53

• Numerical Simulation of a Steel Weld Joint and Fracture Mechanics Study of a Compact Tension Specimen for Zones of Weld Joint

  BENSARI AHMED, Ould Chikh El Bahri, Bouchouicha Benattou, Tirenifi Malika

  Requires Subscription PDF Requires Subscription Visual Abstract

  17-29

• Numerical Investigation on Stress Intensity Factor and J Integral in Friction Stir Welded Joint through XFEM method

  Imane imane_elmeguenni Elmeguenni, Mohamed Mazari

  Requires Subscription PDF Requires Subscription Visual Abstract

  54-64

• The impact of the temperature and exploitation time on the tensile properties and plain strain fracture toughness, KIc in characteristic areas of welded joint

  Simon Sedmak, Ivica Čamagić, Aleksandar Sedmak, Zijah Burzić, Mihajlo Aranđelović

  Requires Subscription PDF Requires Subscription Visual Abstract

  371-382

• Investigating the contribution of geometrical parameters and immersion time on fracture toughness of jute fabric composites using statistical techniques

  Dr. Bharath K N, G. B. Manjunatha

  Requires Subscription PDF Requires Subscription Visual Abstract

  14-24

• The discontinuous solutions of Lame’s equations for a conical defect

  Natalya D. Vaysfel'd, O. Reut

  Requires Subscription PDF Requires Subscription Visual Abstract

  183-190

• Elastic crack-tip stress field in a semi-strip

  Victor Reut, Natalya Vaysfeld, Zinaida Zhuravlova

  Requires Subscription PDF

  82-93

• An innovative micromechanics-based three-dimensional long-term strength criterion for fracture assessment of rock materials

  xiaoping zhou, Xiaocheng Huang, Filippo Berto

  Requires Subscription PDF

  64-81

• Numerical analysis of the influence of liquid on propagation of a rolling contact fatigue crack

  Miroslaw Olzak, Janusz Piechna, Pawel Pyrzanowski

  Requires Subscription PDF

  Pages 46-55

• Pilot evaluation of a fracture process zone in a modified compact tension specimen by X-ray tomography

  Jiri Klon, Stanislav Seitl, Hana Simonova, Zbynek Kersner, Ivana Kumpova, Daniel Vavrik

  Requires Subscription PDF

  Pages 161-169

• Over-deterministic method: The influence of rounding numbers on the accuracy of the values of Williams’ expansion terms

  Vladimir Ruzicka, Lucie Malikova, Stanislav Seitl

  Requires Subscription PDF

  Pages 128-135

• Generalised fracture mechanics approach to the interfacial failure analysis of a bonded steel-concrete joint

  Wouter De Corte, Peter Helincks, Veerle Boel, Jan Klusak, Stanislav Seitl, Geert De Schutter

  Requires Subscription PDF

  Pages 147-160

• Crack onset assessment near the sharp material inclusion tip by means of modified maximum tangential stress criterion

  Ondrej Krepl, Jan Klusák

  Requires Subscription PDF

  Pages 66-73

• Comparison of fracture toughness values of normal and high strength concrete determined by three point bend and modified disk-shaped compact tension specimens

  Stanislav Seitl, José D. Ríos, Hector Cifuentes

  Requires Subscription PDF

  Pages 56-65

• The influence of crack tip shielding on fatigue crack propagation

  Anghel Cernescu

  Requires Subscription PDF

  Pages 307-313

• Experimental methodology for the quantification of crack tip plastic zone and shape from the analysis of displacement fields

  J.M. Vasco-Olmo, F.A. Diaz, M.N. James, C.J. Christopher, E.A. Patterson

  Requires Subscription PDF

  Pages 166-174

• Effect of numerical parameters on plastic CTOD

  F.V. Antunes, R. Simoes, R. Branco, P. Prates

  Requires Subscription PDF

  Pages 149-156