High and Very High Cycle Fatigue

All Items

• Investigation fatigue crack initiation and propagation cruciform welded joints by extended finite element method (XFEM) and implementation SED approach

  Hamza Djeloud, Mustafa Moussaoui, Ahmed Kellai, Dahmane Hachi, Filippo Berto, Benattou Bouchouicha, Brahim Elkhalil Hachi

  Requires Subscription PDF Requires Subscription Visual Abstract

  346-362

• Novel 2D strain-rate-dependent lamina-based and RVE/phase-based progressive fatigue damage criteria for randomly loaded multi-layer fiber-reinforced composites

  M. Shariyat

  Requires Subscription PDF Requires Subscription Visual Abstract

  423-443

• Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method

  Sviatoslav Eleonsky, Yuri Matvienko , Vladimir Pisarev, Michael Zajtsev

  Requires Subscription PDF Requires Subscription Visual Abstract

  115-128

• Determining the endurance limit of AISI 4340 steels in terms of different statistical approaches

  Salim Çalışkan, Rıza Gürbüz

  Requires Subscription PDF Requires Subscription Visual Abstract

  344-364

• Residual stresses near cold-expanded hole at different stages of high-cycle fatigue by crack compliance data

  Sviatoslav Eleonsky, Vladimir Pisarev, Mikhail Zajtsev, Mikhail Zichenkov , Marat Abdullin

  Requires Subscription PDF Requires Subscription Visual Abstract

  171-196

• A brief review of fatigue design criteria on offshore wind turbine support structures

  Paulo Mendes, José A.F.O. Correia, Abílio M.P. De Jesus, Bianca Ávila, Hermes Carvalho, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  302-315

• Influence of different loading paths on the multiaxial fatigue behavior of 2024 aluminum alloy under the same amplitude values of the second invariant of the stress deviator tensor

  Andrey Yankin, A.I. Mugatarov, V.E. Wildemann

  Requires Subscription PDF Requires Subscription Visual Abstract

  327-335

• Influence of contact parameters in fretting-fatigue contact 3D problems

  Fella Hamadouche, Habib Benzaama, Mohamed Mokhtari, Miloud Abbes Tahar

  Requires Subscription PDF Requires Subscription Visual Abstract

  228-240

• Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging

  Andrew Gryguc, Sugrib Kumar Shaha, Seyed Behzad Behravesh, Hamid Jahed, Mary Wells, Bruce Williams

  Requires Subscription PDF Requires Subscription Visual Abstract

  152-165

• Crack growth based life prediction approach under LCF-HCF interaction

  Aritra Sarkar, M. Okazaki, A. Nagesha, R. Sandhya

  Requires Subscription PDF Requires Subscription Visual Abstract

  86-97

• Fatigue strength of inner knurled interference fit joined by forming and cutting methods

  Lukas Suchy, E. Leidich, A. Hasse, T. Gerstmann, B. Awiszus

  Requires Subscription PDF Requires Subscription Visual Abstract

  429-434

• Damage evolution in the AlMg6 alloy during high and very high cycle fatigue

  Mikhail Bannikov, Dmitry Bilalov, Vladimir Oborin, Oleg Naimark

  Requires Subscription PDF Requires Subscription Visual Abstract

  383-395

• Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS

  Annalisa Pola, Davide Battini, Marialaura Tocci, Andrea Avanzini, Luca Girelli, Candida Petrogalli, Marcello Gelfi

  Requires Subscription PDF Requires Subscription Visual Abstract

  775-790

• Further investigation on microstructure refinement of internal crack initiation region in VHCF regime of high-strength steels

  Yukun Chang, Liang Zheng, Xiangnan Pan, Youshi Hong

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-11

• High cycle fatigue assessment of steel load-carrying cruciform welded joints: an overview of recent results

  song wei, Xuesong Liu

  Requires Subscription PDF Requires Subscription Visual Abstract

  94-101

• S-N curve modeling method of Aluminum alloy welded joints based on the fatigue characteristics domain

  Li Zou, Xinhua Yang, Jianrong Tan, Yibo Sun

  Requires Subscription PDF

  Pages 137-148

• Local strain energy density for the fatigue assessment of hot dip galvanized welded joints: some recent outcomes

  M. Peron, S.M.J. Razavi, F. Berto, J. Torgersen, F. Mutignani

  Requires Subscription PDF

  Pages 205-213

• The fatigue behavior of V-notches in presence of residual stresses: recent developments and future outcomes

  P. Ferro, M. Peron, S.M.J. Razavi, F. Berto, J. Torgersen

  Requires Subscription PDF

  Pages 189-195

• Effect of corrosion and sandblasting on the high cycle fatigue behavior of reinforcing B500C steel bars

  Marina C. Vasco, Panagiota Polydoropoulou, Apostolos N. Chamos, Spiros G. Pantelakis

  Requires Subscription PDF

  Pages 9-22

• Effect of hot dip galvanization on the fatigue strength of steel bolted connections

  S.M.J. Razavi, M. Peron, J. Torgersen, F. Berto, F. Mutignani

  Requires Subscription PDF

  Pages 432-439

• Development of a Very High Cycle Fatigue (VHCF) multiaxial testing device

  M. Vieira, M. de Freitas, L. Reis, A. M. R. Ribeiro

  Requires Subscription PDF

  131-137

• Ultrasonic fatigue testing device under biaxial bending

  C. Brugger, T. Palin-Luc, P. Osmond, M. Blanc

  Requires Subscription PDF

  46-51

• Very high cycle fatigue strength and crack growth of thin steel sheets

  Mohand Ouarabi, Ruben Perez Mora, Claude Bathias, Thierry Palin-Luc

  Requires Subscription PDF

  Pages 112-118

• Experimental investigation of crack initiation and propagation in high- and gigacycle fatigue in titanium alloys by study of morphology of fracture

  M.V. Bannikov, O. B. Naimark, V.A. Oborin

  Requires Subscription PDF

  pages 51-56

• Crack initiation characteristics and fatigue property of a high-strength steel in VHCF regime under different stress ratios

  Xiaolong Liu, Chengqi Sun, Youshi Hong

  Requires Subscription PDF

  pages 88-97

• Prediction of three-dimensional crack propagation paths taking high cycle fatigue into account

  Guido Dhondt

  Requires Subscription PDF

  pages 108-113

• Crack path in aeronautical titanium alloy under ultrasonic torsion loading

  A. Nikitin, C. Bathias, T. Palin-Luc, A. Shanyavskiy

  Requires Subscription PDF

  pages 213-222

• The study of a defect evolution in iron under fatigue loading in gigacyclic fatigue regime

  O. Plekhov, O. Naimark

  Requires Subscription PDF

  pages 414-423

• Multiscale study of fracture in aluminum-magnesium alloy under fatigue and dynamic loading

  Vladimir Oborin, Mikhail Bannikov, Oleg Naimark, Mikhail Sokovikov, Dmitry Bilalov

  Requires Subscription PDF

• Crack path for run-out specimens in fatigue tests: is it belonging to high- or very-high-cycle fatigue regime?

  A. Shanyavskiy

  Requires Subscription PDF

• Competition between microstructure and defect in multiaxial high cycle fatigue

  F. Morel, R. Guerchais, N. Saintier

  Requires Subscription PDF

  pages 404-414

• Investigation of very high cycle fatigue by thermographyc method

  V. Crupi, G. Epasto, E. Guglielmino, G. Risitano

  Requires Subscription PDF

  pages 569-577

• Duplex S-N fatigue curves: statistical distribution of the transition fatigue life

  D.S. Paolino, A. Tridello, H.S. Geng, G. Chiandussi, M. Rossetto

  Requires Subscription PDF

  pages 417-423

• A method for calculation of finite fatigue life under multiaxial loading in high-cycle domain

  M. Malnati

  Requires Subscription PDF

  pages 12-18

• Comparison between dog-bone and Gaussian specimens for size effect evaluation in gigacycle fatigue

  A. Tridello, D.S. Paolino, G. Chiandussi, M. Rossetto

  Requires Subscription PDF

  Pages 49-56

• Crack propagation mechanism and life prediction for very-highcycle fatigue of a structural steel in different environmental medias

  Guian Qian, Chengen Zhou, Youshi Hong

  Requires Subscription PDF

  Pages 7-14

• Subsurface metals fatigue cracking without and with crack tip

  Andrey Shanyavskiy

  Requires Subscription PDF

  Pages 36-43