Alloys: Al alloys

All Items

• Optimization of Ultimate Tensile Strength with DOE Approach for Application FSW Process in the Aluminum alloys AA6061-T651 & AA7075 -T651

  Mohammed Chaib , Abdelkader Slimane, Sid Ahmed Slimane , Abdelakder Ziadi , Benattou Bouchouicha

  Requires Subscription PDF Requires Subscription Visual Abstract

  169-181

• Effect of nano-clay addition and heat-treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy

  Mohammad Azadi, Adel Basiri, Ali Dadashi, G. Winter, B. Seisenbacher, F. Grün

  Requires Subscription PDF Requires Subscription Visual Abstract

  373-397

• Microstructure and Mechanical Properties of Aluminum Cast Alloy A356 reinforced with Dual-Size B4C Particles

  J. R. Chandrashekar, M. H. Annaiah, R. Chandrashekar

  Requires Subscription PDF Requires Subscription Visual Abstract

  127-137

• Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques

  M. Ravikumar, R. Suresh, H. N. Reddappa, Y. S. Ram Mohan, C. R. Nagaraja, E. R. Babu

  Requires Subscription PDF Requires Subscription Visual Abstract

  160-170

• Study of mechanical behavior by fatigue of a cracked plate repaired by different composite patches

  Abdelmadjid Moulgada, Djafar Ait kaci, Mohammed El Sallah Zagane, Sahli Abderrahmane, Rachid Zahi

  Requires Subscription PDF Requires Subscription Visual Abstract

  195-202

• Effect of addition of different reinforcements on the microstructure and mechanical characterization of the Al-Flyash composites

  Milind K. Wasekar, Mohan P. Khond

  Requires Subscription PDF Requires Subscription Visual Abstract

  217-228

• Residual stresses near cold-expanded hole at different stages of high-cycle fatigue by crack compliance data

  Sviatoslav Eleonsky, Vladimir Pisarev, Mikhail Zajtsev, Mikhail Zichenkov , Marat Abdullin

  Requires Subscription PDF Requires Subscription Visual Abstract

  171-196

• Influence of different loading paths on the multiaxial fatigue behavior of 2024 aluminum alloy under the same amplitude values of the second invariant of the stress deviator tensor

  Andrey Yankin, A.I. Mugatarov, V.E. Wildemann

  Requires Subscription PDF Requires Subscription Visual Abstract

  327-335

• Influence of stress ratio on residual stress evolution near cold-expanded hole due to low-cycle fatigue by crack compliance data

  Andrey Chernov, Sviatoslav Eleonsky, Vladimir Pisarev

  Requires Subscription PDF Requires Subscription Visual Abstract

  174-186

• Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite

  Paolo Ferro, Alberto Fabrizi, Franco Bonollo, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  289-301

• Finite element analysis of the behavior of bonded composite patches repair in aircraft structures

  Islam El-Sagheer, Mai Taimour, Mariam Mobtasem, Amr Abd-Elhady , Hossam El-Din M. Sallam

  Requires Subscription PDF Requires Subscription Visual Abstract

  128-138

• Prediction of mechanical behavior of friction stir welded joints of AA3003 aluminum alloy

  Ismail Chekalil, Abdelkader Miloudi, Marie-Pierre Planche, Abdelkader Ghazi

  Requires Subscription PDF Requires Subscription Visual Abstract

  153-168

• Numerical analysis of circular and square section concrete filled aluminum tubes under axial compression

  Pan Jinlong, Li Guanhua, Jingming Cai

  Requires Subscription PDF Requires Subscription Visual Abstract

  169-181

• Fatigue Life Simulation and Analysis of Aluminum Alloy Sheet Self-piercing Riveting

  Qingchun Zheng, Naixin Wang, Peihao Zhu, Jingna Liu, Wenpeng Ma

  Requires Subscription PDF Requires Subscription Visual Abstract

  141-151

• Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints

  Paulo NB Reis, Ana Amaro, Altino Loureiro

  Requires Subscription PDF Requires Subscription Visual Abstract

  124-133

• The Effect of corrosion on the quality repair of the aluminum alloy A 5083 H11 by bonded composites

  Sadek Kaddour, Benaoumeur Aour, Mohammed Salah Bennouna, Abderrahim Talha, Belabbes Bachir Bouiadjra, Morad fari bouanani

  Requires Subscription PDF Requires Subscription Visual Abstract

  51-65

• Uniformity of thickness of metal sheets by patchwork blanks: potential of adhesive bonding

  Gianluca Parodo, Gillo Giuliano, Luca Sorrentino

  Requires Subscription PDF Requires Subscription Visual Abstract

  166-176

• A new approach of CMT seam welding deformation forecasting based on GA-BPNN

  Yao Lu, Yanfeng Xing, Xuexing Li, Sha Xu

  Requires Subscription PDF Requires Subscription Visual Abstract

  325-336

• Elastoplastic analysis of cracked Aluminum plates with a hybrid repair technique using the bonded composite patch and drilling hole in opening mode I

  Wahiba Nessrine Bouzitouna, Wahid Oudad, Mohamed Belhamiani, Djamel Eddine Belhadri, Leila Zouambi

  Requires Subscription PDF Requires Subscription Visual Abstract

  256-268

• Simulation of the delay effect after applying a simple overload on alloys of aluminum 2024T351 using the Willemborg model

  Kaddour Bahram, Mohamed Chaib, Abdelkader Slimene, Benattou Bouchouicha

  Requires Subscription PDF Requires Subscription Visual Abstract

  467-476

• Influence of static mean stresses on the fatigue behavior of 2024 aluminum alloy under multiaxial loading

  Andrey Yankin, Valerii Wildemann, Nikolai Belonogov, Oleg Staroverov

  Requires Subscription PDF Requires Subscription Visual Abstract

  151-163

• Experimental investigation of fatigue crack initiation from notch for 2024 T351 Al-alloy

  Mustapha Benachour, Nadjia Benachour, Mohamed Benguediab

  Requires Subscription PDF Requires Subscription Visual Abstract

  45-51

• Metal foaming by powder metallurgy process: investigation of different parameters on the foaming efficiency

  Ioannis Papantoniou, Helena Kyriakopoulou, Dimitrios Pantelis, Dimitrios Manolakos

  Requires Subscription PDF Requires Subscription Visual Abstract

  497-504

• A SEM-X-Ray assisted experimental approach for the determination of mechanical and thermal load – induced damage in MMCs

  Victor Kytopoulos, Emilios Sideridis, John Venetis, Chrysoula Riga, Alexandros Altzoumailis

  Requires Subscription PDF Requires Subscription Visual Abstract

  414-422

• Simulation of the corrosion-induced damage on aluminum alloy 2024 specimens with equivalent surface notches

  Nikolaos Alexopoulos, Nikoleta Siskou, Christina-Margarita Charalampidou, Stavros Kourkoulis

  Requires Subscription PDF Requires Subscription Visual Abstract

  342-353