Materials mechanical behavior and image analysis

All Items

• Analysis of the resistance to crack propagation in SENT test specimens printed in ABS using parallel or crossed filaments between layers

  Oumaima Aourik, Abdelkerim Chouaf, Mourad Othmani

  Requires Subscription PDF Requires Subscription Visual Abstract

  246-256

• Study of the slant fracture in solid and hollow cylinders: Experimental analysis and numerical prediction

  Nassima Ben Chabane, Nassim Aguechari, Mohand Ould Ouali

  Requires Subscription PDF Requires Subscription Visual Abstract

  169-189

• High Entropy Cantor Alloys (HEAs) modification induced by tungsten alligation, heat treatment and deep cold plastic deformation

  Andrea Brotzu, Stefano Natali, Zortea Laura, De Filippo Barbara

  Requires Subscription PDF Requires Subscription Visual Abstract

  309-320

• Investigation on Microstructure and Tensile Fractography of RE Oxides (CeO2/Y2O3) Reinforced AZ91D Magnesium Matrix Composites

  Santhosh Gotagunaki, Vardhaman S. Mudakappanavar, R. Suresh

  Requires Subscription PDF Requires Subscription Visual Abstract

  100-109

• Improvement of crack tip position estimation in DIC images by image processing methods

  Najat Zekriti, Fatima Majid, Hachimi Taoufik, Yassine Tounsi, Rajaa Rhanim, Ibrahim Mrani, Hassan Rhanim

  Requires Subscription PDF Requires Subscription Visual Abstract

  61-71

• Description of Fatigue Sensitivity Curves and Transition to Critical States of Polymer Composites by Cumulative Distribution Functions

  O.A. Staroverov, A.I. Mugatarov, A.S. Yankin, V.E. Wildemann

  Requires Subscription PDF Requires Subscription Visual Abstract

  91-99

• Influence of Quenching Agents on Mechanical, Wear, and Fracture Characteristics of Al2O3 / MoS2 Reinforced Al-6061 Hybrid Metal Matrix Composite (MMCs)

  K. R. Suchendra, M. Sreenivasa Reddy; M. Ravikumar

  Requires Subscription PDF Requires Subscription Visual Abstract

  122-133

• Microstructure characterization of sustainable light weight concrete using trapped air additions.

  Said Maaty, Ahmed Elshami, Fryal Kamel

  Requires Subscription PDF Requires Subscription Visual Abstract

  194-211

• Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially

  Yousria Boulmaali-Hacene Chaouche, Nadia Kouider, Kamel Djeghaba, Bachir Kebaili

  Requires Subscription PDF Requires Subscription Visual Abstract

  91-106

• Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites

  M. Ravikumar, Rudra Nail

  Requires Subscription PDF Requires Subscription Visual Abstract

  439-447

• The P-h2 relationship as a function of (hf/hm) in indentation

  Samir Habibi

  Requires Subscription PDF Requires Subscription Visual Abstract

  613-623

• Experimental and numerical investigation of gap K-joints of rectangular hollow section trusses

  Faycal Slimani, Mohammed Benzerara, Messaoud Saidani

  Requires Subscription PDF Requires Subscription Visual Abstract

  107-125

• Use of combined CZM and XFEM techniques for the patch shape performance analysis on the behavior of a 2024-T3 aluminum structure reinforced with a composite patch

  Kouider Madani, Safaa Chahrazed Djebbar, Nadia Kaddouri, Mohamed El Ajrami, Mohamed Belhouari

  Requires Subscription PDF Requires Subscription Visual Abstract

  304-325

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  Requires Subscription PDF Requires Subscription Visual Abstract

  26-53

• Compressive behavior of Co-Cr-Mo radially graded porous structures under as-built and heat-treated conditions

  Francesco Cantaboni, Paola Ginestra, Marialaura Tocci, Andrea Avanzini, Elisabetta Ceretti, Annalisa Pola

  Requires Subscription PDF Requires Subscription Visual Abstract

  490-504

• Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel

  Nicolás Emanuel Tenaglia, Diego Fernandino, Alejandro Daniel Basso

  Requires Subscription PDF Requires Subscription Visual Abstract

  212-224

• Experimentally evaluation of high-performance concrete mixes used for tunnels and containing silica fume and polypropylene fiber after exposed to high temperatures

  Mohamed Elmesiri, Mohamed Fawzy Ahmed, Mohamed Bneni, Ahmed ElShami, Seleem Ahmad

  Requires Subscription PDF Requires Subscription Visual Abstract

  408-425

• Failure analysis of compressed earth block using numerical plastic damage model

  Samir Bouhiyadi, Laidi Souinida, Youssef El hassouani

  Requires Subscription PDF Requires Subscription Visual Abstract

  634-659

• High-quality nodule analysis in spheroidal graphite cast iron using X-ray micro-computed tomography

  Juan Toledo, Felipe Diaz, Matías Peralta, Diego Fernandino

  Requires Subscription PDF Requires Subscription Visual Abstract

  279-288

• Influence of Free Ferrite on the Mechanical Properties of High Strength Intercritical Austempered Ductile Iron

  Alejandro Daniel Basso, Martin Caldera, Nicolás Emanuel Tenaglia, Diego Fernandino, Roberto Enrique Boeri

  Requires Subscription PDF Requires Subscription Visual Abstract

  519-529

• Effects of residual stresses on interlaminar radial strength of Glass-Epoxy L-bend composite laminates

  M.A. Umarfarooq, P. S. Shivakumar Gouda, K. N. Bharath, G. B. Veereshkumar, N. R. Banapurmath, Abhilash Edacherian

  Requires Subscription PDF Requires Subscription Visual Abstract

  140-153

• Effects of rubber aggregates on the physical-mechanical, thermal and durability properties of self-compacting sand concrete

  Faisal Abdelrahman Hashem SALEH, Nouria Kaid, Kada Ayed , Djamel-Eddine Kerdal, Nadjib Chioukh, Nordine Leklou

  Requires Subscription PDF Requires Subscription Visual Abstract

  89-107

• Flexural behavior of delta and bi-delta cold-formed steel beams: experimental investigation and numerical analysis

  Yazid Hadidane, Nadia Kouider, Mohammed Benzerara

  Requires Subscription PDF Requires Subscription Visual Abstract

  69-88

• Identification of the anisotropic behavior of the laser welded Interstitial Free steel HC260Y subjected to uniaxial tensile tests

  Latifa Arfaoui, Amel Samet, Amna Znaidi

  Requires Subscription PDF Requires Subscription Visual Abstract

  282-293

• A Study on microstructure, mechanical and fracture behavior of Al2O3 - MoS2 reinforced Al6061 hybrid composite

  K. R. Suchendra, Reddy M Sreenivasa; M. Ravikumar

  Requires Subscription PDF Requires Subscription Visual Abstract

  244-253

• Improvement of hydration products for self-compacting concrete by using magnetized water

  A.A. ELShami, Noura Essam, El-Shikh M. Yousry

  Requires Subscription PDF Requires Subscription Visual Abstract

  352-371

• Impact behaviour of dissimilar AA2024-T351/7075-T651 FSWed butt-joints: effects of Al2O3-SiC particles addition

  Cindy Morales, Mattia Merlin, Annalisa Fortini, Gian Luca Garagnani, Argelia Miranda

  Requires Subscription PDF Requires Subscription Visual Abstract

  504-515

• Microstructure and anisotropic tensile performance of 316L stainless steel manufactured by selective laser melting

  Lin Wang

  Requires Subscription PDF Requires Subscription Visual Abstract

  380-391

• The proposition of analytical expression HM–(√P/S) in microindentation pile-up deformation mode

  Samir Habibi, Djamel Zddine Semsoum , Soufiane Benaissa , Hassen Merzouk

  Requires Subscription PDF Requires Subscription Visual Abstract

  407-415

• Web post-buckling strength of thin-webbed cellular beams using carbon PFRP profiles

  Hamda Guedaoura, Yazid Hadidane

  Requires Subscription PDF Requires Subscription Visual Abstract

  43-61

• PVC failure modelling through experimental and digital image correlation measurements

  Najat Zekriti, Fatima Majid, Rajae Rhanim, Ibrahim Mrani, Hassan Rhanim

  Requires Subscription PDF Requires Subscription Visual Abstract

  488-503

• Mechanical behaviour of sandy soils embankments treated with cement and reinforced with discrete elements (fibres)

  Yasmine Med Bouteben, Boudaoud Zeineddine

  Requires Subscription PDF Requires Subscription Visual Abstract

  174-186

• Effect of petrographic composition and chemistry of aggregate on the local and general fracture response of cementitious composites

  Michal Vyhlídal, Iva Rozsypalová, Hana Šimonová, Barbara Kucharczyková, Leona Vavro, Martin Vavro, Jiří Němeček, Pavla Rovnaníková, Zbyněk Keršner

  Requires Subscription PDF Requires Subscription Visual Abstract

  13-29

• The investigation of additive manufacturing and moldable materials to produce railway ballast grain analogs

  Bence Szabó, L. Pásthy, Á. Orosz, K. Tamás

  Requires Subscription PDF Requires Subscription Visual Abstract

  213-228

• Self-healing mortar using different types, content, and concentrations of bacteria to repair cracks.

  Mohamed.A.R. Elmahdy, A.A. ELShami, El-Shikh M. Yousry, Seleem S. E. Ahmad

  Requires Subscription PDF Requires Subscription Visual Abstract

  486-513

• Analysis of workability, mechanical strength and durability by the FT-IR method of concrete based on silica-limestone sand preserved in aggressive environments

  Hima Abdelkader, Tarek Djedid, Mohammed Mani, Abdelhamid Guettala

  Requires Subscription PDF Requires Subscription Visual Abstract

  566-579

• Cracking Patterns of Brittle Hemispherical Domes: an Experimental Study

  Siwen Cao, Andras A. Sipos

  Requires Subscription PDF Requires Subscription Visual Abstract

  265-310

• Reinforced Soft Soil by CSV with/without Polypropylene fibres: Experimental and Numerical analysis.

  Anouar Souadeuk, Zeineddine Boudaoud

  Requires Subscription PDF Requires Subscription Visual Abstract

  374-395

• Sensitivity analysis of the GTN damage parameters at different temperature for dynamic fracture propagation in X70 pipeline steel using neural network

  Abdelmoumin Ouladbrahim, Idir Belaidi , Samir Khatir , Erica Magagnini, Roberto Capozucca , Magd Abdel Wahab

  Requires Subscription PDF Requires Subscription Visual Abstract

  442-452

• Influence of 3d-printing parameters on the mechanical properties of 17-4PH stainless steel produced through Selective Laser Melting

  Francesca Romana Andreacola, Ilaria Capasso, Letizia Pilotti, Giuseppe Brando

  Requires Subscription PDF Requires Subscription Visual Abstract

  282-295

• The effect of using polypropylene fibers on the durability and fire resistance of concrete

  Hassan Suiffi, Anas El Maliki, Fatima Majid, Omar Cherkaoui

  Requires Subscription PDF Requires Subscription Visual Abstract

  296-307

• Study on Micro - Nano Sized Al2O3 Particles on Mechanical, Wear and Fracture Behavior of Al7075 Metal Matrix Composites

  M. Ravikumar, H. N. Reddappa, R. Suresh, E. R. Babu, C. R. Nagaraja

  Requires Subscription PDF Requires Subscription Visual Abstract

  166-178

• Experimental study of the Portevin-Le Chatelier effect under complex loading of Al-Mg alloy: procedure issues

  Tatyana Viсtorovna Tretyakova, Mikhail Tretyakov, Evgeniia Chechulina

  Requires Subscription PDF Requires Subscription Visual Abstract

  434-441

• Inverse problems with the digital image correlation: approach and applications

  Emanuele Sgambitterra, Fabrizio Niccoli

  Requires Subscription PDF Requires Subscription Visual Abstract

  300-320

• Reliability assessment of the behavior of reinforced and/or prestressed concrete beams sections in shear failure

  Karim Benyahi, Mohand Said Kachi, Youcef Bouafia, Salma Barboura, Jia Li

  Requires Subscription PDF Requires Subscription Visual Abstract

  195-222

• Optimization of High-Performance-Concrete properties containing fine recycled aggregates using mixture design modeling

  Tounsia Boudina, Dalila Benamara, Rebih Zaitri

  Requires Subscription PDF Requires Subscription Visual Abstract

  50-62

• Evaluation of the survivability of CFRP honeycomb-cored panels in compression after impact tests

  Oleg Staroverov, Elena Strungar, Valery Wildemann

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-15

• Study of the Influence of Alloying Elements on the Mechanical Characteristics and Wear Behavior of a Ductile Cast Iron

  Iliasse Boulifa, Ali Hadji

  Requires Subscription PDF Requires Subscription Visual Abstract

  74-83

• Exploitation of static and dynamic methods for the analysis of the mechanical nanoproperties of polymethylmetacrylate by indentation

  Soufiane Benaissa, Samir Habibi, Djameleddine Semsoum, Hassen Merzouk, Abdelnou Mezough, Bénali Boutabout, Alex Montagne

  Requires Subscription PDF Requires Subscription Visual Abstract

  46-55

• Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite

  Abdelmalek Regad, Djebara Benzerga, Habib Berrekia, Abdelkader Haddi , Nourredine Chekhar

  Requires Subscription PDF Requires Subscription Visual Abstract

  115-122