Sandwiches, Joints and Coatings

All Items

• Uniformity of thickness of metal sheets by patchwork blanks: potential of adhesive bonding

  Gianluca Parodo, Gillo Giuliano, Luca Sorrentino

  Requires Subscription PDF Requires Subscription Visual Abstract

  166-176

• Unified methodology for characterisation of global fatigue damage evolution in adhesively bonded joints

  Jaiswal Pankaj, Rahul Iyer Kumar, Wim De Waele

  Requires Subscription PDF Requires Subscription Visual Abstract

  26-37

• Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints

  Paulo NB Reis, Ana Amaro, Altino Loureiro

  Requires Subscription PDF Requires Subscription Visual Abstract

  124-133

• Optimization design based approach for the determination and minimization of the displacement under tensile load in hybrid composite joint

  Sahli Abderahmane, Fouzia Merabbi, Abdelkader Lousdad, Abdelkader Megueni

  Requires Subscription PDF Requires Subscription VIsual Abstract

  281-298

• Numerical Analysis and Verification of Residual Stress in T Joint of S355 Steel

  Xiangming Wang, Erfu Guo

  Requires Subscription PDF Requires Subscription Visual Abstract

  25-32

• Three-dimensional Numerical Analysis of a Joint Bonded Reinforced with Silica Nanoparticles (SiO2)

  Noureddine Djebbar, Rachid Hadj Boulenouar, Benali Boutabout

  Requires Subscription PDF Requires Subscription Visual Abstract

  128-136

• Study on the thermal cycle of Wire Arc Additive Manufactured (WAAM) carbon steel wall using numerical simulation

  Mohsen Saadatmand, Reza Talemi

  Requires Subscription PDF Requires Subscription Visual Abstract

  98-104

• Experimental and Numerical Analysis of Epoxy Based Adhesive Failure on Mono- and Bi-Material Single Lap Joints Under Different Displacement Rates

  Hojjat Ghahramanzadeh Asl, Salim Çam, Osman Orhan, Adnan Özel

  Requires Subscription PDF Requires Subscription Visual Abstract

  9-24

• Influence of porosity on the analysis of sandwich plates FGM using of high order shear-deformation theory.

  Slimane Merdaci, Adda Hadj Mostefa

  Requires Subscription PDF Requires Subscription Visual Abstract

  199-214

• Stress intensity factor for small embedded cracks in weldments

  Paolo Livieri, Fausto Segala

  Requires Subscription PDF Requires Subscription Visual Abstract

  613-622

• Multi-parameter analysis of curing cycle for GNPs/glass fabric/ epoxy laminated nanocomposites

  Georgios Seretis, Aikaterini Polyzou, Dimitrios Manolakos, Christopher Provatidis

  Requires Subscription PDF Requires Subscription Visual Abstract

  517-525

• Finite Element Analysis and ANFIS investigation of seismic behavior of sandwich panels with different concrete material in two story steel building

  Faezeh Jafari, Baitollah Badarloo

  Requires Subscription PDF Requires Subscription Visual Abstract

  209-230

• A metallurgical and thermal analysis of Inconel 625 electron-beam welded joints

  Luca Romanin, Paolo Ferro, Alberto Fabrizi, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  251-263

• Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint

  Badr Benamar, Mokhtari Mohamed, Madani Kouider , Benzaama Habib

  Requires Subscription PDF Requires Subscription Visual Abstract

  112-125

• Structural Integrity Assessment of Weld for Joining Waveguide to Annular Linear Induction Pump Subjected to Vibration

  Ashish Kumar, Y.V. Nagaraja Bhat, B.K. Sreedhar, S.I. Sundar Raj, V. Prakash, P. Selvaraj

  Requires Subscription PDF Requires Subscription Visual Abstract

  515-525

• Numerical-Experimental characterization of honeycomb sandwich panel and numerical modal analysis of implemented delamination

  AYA BENDADA, Djilali Boutchicha, Adel Chouiter, Mokhtaria Miri

  Requires Subscription PDF Requires Subscription Visual Abstract

  655-665

• Use of the XFEM for the design of adhesively-bonded T-joints

  Raul Campilho, Filipe Moreira

  Requires Subscription PDF Requires Subscription Visual Abstract

  435-449

• Investigating the contribution of geometry on the failure of cellular core structures obtained by additive manufacturing

  Hugo Araújo, Marco Leite, AMR Ribeiro, Augusto M Deus, Luis Reis, M Fatima Vaz

  Requires Subscription PDF Requires Subscription Visual Abstract

  478-486

• Flexural testing and analysis of full-strain-fields in sandwich composites

  Rosa Marat-Mendes, Ricardo Martins, Alexandre Garcia, Luis Reis

  Requires Subscription PDF Requires Subscription Visual Abstract

  568-585

• Intermetallic phase kinetic formation and thermal crack development in galvanized DCI

  Costanzo Bellini, Francesco Carlino

  Requires Subscription PDF Requires Subscription Visual Abstract

  740-747

• Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA

  Carlos Vicente, João Fernandes, Augusto Deus, Maria Vaz, Marco Leite, Luis Reis

  Requires Subscription PDF Requires Subscription Visual Abstract

  748-756

• Fatigue strength evaluation and fracture behavior of joined dual phase steel/AA6061-T6 aluminum alloy

  Ruben Perez Mora, Celso Eduardo Cruz Gonzalez, Saul Daniel Santillan Gutierrez, Jose Jaime Taha Tijerina, Benjamin Vargas Arista, Arturo Barba Pingarron

  Requires Subscription PDF Requires Subscription Visual Abstract

  530-544

• Innovative geometric design improves the resistance of simple metal / metal lap joint

  Mehadjia Bezzerrouki

  Requires Subscription PDF Requires Subscription Visual Abstract

  491-502

• Development of hybrid friction stir welding and adhesive bonding single lap joints in aluminium alloys

  Ricardo Leite Maciel, Virginia Infante, Daniel Braga, Pedro Moreira, Tiago Bento, Lucas da Silva

  Requires Subscription PDF Requires Subscription Visual Abstract

  269-285

• Monotonic and Fracture Behaviours of Bolted Connections with Distinct Bolt Preloads and Surface Treatments

  Vítor M.G. Gomes, Mariana Rodrigues, José A.F.O. Correia, Miguel A.V. Figueiredo, Abílio M.P. de Jesus, António A. Fernandes

  Requires Subscription PDF Requires Subscription Visual Abstract

  304-317