Polymers

All Items

• Ultrasonic welding of lap joints of PEI plates with PEI/CF-fabric prepregs

  Vladislav Alexenko, Defang Tian, Sergey Panin, Svetlana Bochkareva, Iliya Panov

  Requires Subscription PDF Requires Subscription Visual Abstract

  390-409

• Crack resistance of carbonized layer of multilayer polyurethane with nanofillers. Combination of casting, solution, carbonization by ion implantation technologies

  Roman Izyumov, Alexander Svistkov, Vyacheslav Chudinov, Irina Osorgina, Alexander Pelevin

  Requires Subscription PDF Requires Subscription Visual Abstract

  108-117

• Study of defects influence on chlorinated polyvinyl chloride pipes damage and analysis of their fracture

  Fatima Gugouch, M. Meknassi, M. Elghorba, A. Wahid, H. Mouradi, H. Bouhssis, A. Maziri

  Requires Subscription PDF Requires Subscription Visual Abstract

  192-204

• Estimating degradation of strength of neat PEEK and PEEK-CF laminates under cyclic loading by mechanical hysteresis loops

  Alexey Bogdanov, Alexander Eremin, Mikhail Burkov, Sergey Panin, Pavel Lyubutin

  Requires Subscription PDF Requires Subscription Visual Abstract

  152-163

• Fractography and Tensile studies on the effect of different carbon fillers reinforced hybrid nanocomposites

  Balachandra P. Shetty, G. J. Naveen

  Requires Subscription PDF Requires Subscription Visual Abstract

  220-232

• Notch Sensitivity Study in U-notched Polymers Built by Additive Manufacturing (AM)

  Jorge Guillermo Diaz Rodriguez, Alberto David Pertuz Comas, Juan David Sandoval Herrera

  Requires Subscription PDF Requires Subscription Visual Abstract

  127-139

• Experimental and numerical investigations of masonry ‎ beams performance under bending loads

  Samarsamy Hamed, Mohamed Husain, Mahmoud Zaghlal, Alaa El-Sisi

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-16

• Predicting the lifetime of CPVC under increasing temperature and crosshead speed

  Abderrahim Khtibari, A En-Naji, A. Kartouni, M. El Ghorba

  Requires Subscription PDF Requires Subscription Visual Abstract

  140-151

• Fracture Load Estimations for U-Notched and V-Notched 3D Printed PLA and Graphene-Reinforced PLA plates using the ASED Criterion

  Marcos Sánchez, Sergio Arrieta, Sergio Cicero

  Requires Subscription PDF Requires Subscription Visual Abstract

  322-338

• Fracture analysis of defect Chlorinated Poly Vinyl Chloride pipes based on burst pressure and prediction their fraction of life

  Fatima Gugouch, Achraf Wahid, Youssef Bassir, Mohamed Elghorba

  Requires Subscription PDF Requires Subscription Visual Abstract

  218-228

• Improvement of crack tip position estimation in DIC images by image processing methods

  Najat Zekriti, Fatima Majid, Hachimi Taoufik, Yassine Tounsi, Rajaa Rhanim, Ibrahim Mrani, Hassan Rhanim

  Requires Subscription PDF Requires Subscription Visual Abstract

  61-71

• Numerical nonlinear analysis of RC beans with un-strengthened and CFRP-strengthened opening drilled under service loads within shear zones

  Magdy Khalaf, L. Aboul-Nour, M. Khater, M. Ibrahim

  Requires Subscription PDF Requires Subscription Visual Abstract

  206-233

• Delamination effect on the mechanical behavior of 3D printed polymers

  Fatima Majid, T. Hachimi, H. Rhanim, R. Rhanim

  Requires Subscription PDF Requires Subscription Visual Abstract

  26-36

• Analysis of the resistance to crack propagation in SENT test specimens printed in ABS using parallel or crossed filaments between layers

  Oumaima Aourik, Abdelkerim Chouaf, Mourad Othmani

  Requires Subscription PDF Requires Subscription Visual Abstract

  246-256

• Use of combined CZM and XFEM techniques for the patch shape performance analysis on the behavior of a 2024-T3 aluminum structure reinforced with a composite patch

  Kouider Madani, Safaa Chahrazed Djebbar, Nadia Kaddouri, Mohamed El Ajrami, Mohamed Belhouari

  Requires Subscription PDF Requires Subscription Visual Abstract

  304-325

• Influence of hBN and MoS2 fillers on toughness and thermal stability of carbon fabric-epoxy composites

  Mr. Yermal Shriraj Rao, Dr. B. Shivamurthy, Dr. Nanjangud Subbarao Mohan, Dr. Nagaraja Shetty

  Requires Subscription PDF Requires Subscription Visual Abstract

  240-260

• On the use of the stepped isostress method in the prediction of creep behavior of polyamide 6

  Lakhdar Sedira, Mohsein Tedjini, Belhi Guerira, Kamel Meftah

  Requires Subscription PDF Requires Subscription Visual Abstract

  336-348

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  Requires Subscription PDF Requires Subscription Visual Abstract

  26-53

• Damage assessment of different FDM-processed materials adopting Infrared Thermography

  Danilo D'Andrea, Giacomo Risitano, Marcello Raffaele, Filippo Cucinotta, Dario Santonocito

  Requires Subscription PDF Requires Subscription Visual Abstract

  75-90

• Valorization and recycling of packaging belts and post-consumer PET bottles in the manufacture of sand concrete

  Yasmina Biskri, Mohammed Benzerara, Laidi Babouri, Ouided Dehas , Redjem Belouettar

  Requires Subscription PDF Requires Subscription Visual Abstract

  225-239

• A simplified constitutive model for a SEBS gel muscle simulant - Development and experimental validation for finite elements simulations of handgun and rifle ballistic impacts

  Riccardo Andreotti, Valentina Leggewri, Andrea Casaroli, Mauro Quercia, Cristian Bettin, Mauro Zanella, Marco V. Boniardi

  Requires Subscription PDF Requires Subscription Visual Abstract

  176-197

• Finite Fracture Mechanics and Cohesive Crack Model: Size effects through a unified formulation

  Francesco Ferrian, Pietro Cornetti, Liviu Marsavina, Alberto Sapora

  Requires Subscription PDF Requires Subscription Visual Abstract

  496-509

• Natural Frequency based delamination estimation in GFRP beams using RSM and ANN

  T. G. Sreekanth, M. Senthilkumar, S. Manikanta Reddy

  Requires Subscription PDF Requires Subscription Visual Abstract

  487-495

• Effects of rubber aggregates on the physical-mechanical, thermal and durability properties of self-compacting sand concrete

  Faisal Abdelrahman Hashem SALEH, Nouria Kaid, Kada Ayed , Djamel-Eddine Kerdal, Nadjib Chioukh, Nordine Leklou

  Requires Subscription PDF Requires Subscription Visual Abstract

  89-107

• Web post-buckling strength of thin-webbed cellular beams using carbon PFRP profiles

  Hamda Guedaoura, Yazid Hadidane

  Requires Subscription PDF Requires Subscription Visual Abstract

  43-61

• Recycling of plastic waste polyethylene terephthalate (PET) as a modifier in asphalt mixture: study of Creep-Recovery at Low, Medium, and Hot Temperatures

  Amine Bekhedda, M’hammed Merbouh

  Requires Subscription PDF Requires Subscription Visual Abstract

  438-450

• The investigation of additive manufacturing and moldable materials to produce railway ballast grain analogs

  Bence Szabó, L. Pásthy, Á. Orosz, K. Tamás

  Requires Subscription PDF Requires Subscription Visual Abstract

  213-228

• Fatigue strength evaluation of PPGF35 by energy approach during mechanical tests

  Giacomo Risitano

  Requires Subscription PDF Requires Subscription Visual Abstract

  537-548

• Effect of nylon fabric reinforcement on the mechanical performance of adhesive joints made between glass and GFRP

  Placido Munafò, Francesco Marchione, Gianluca Chiappini, Monica Marchini

  Requires Subscription PDF Requires Subscription Visual Abstract

  89-104

• Effect of the Stress State on the Adhesive Strength of an Epoxy-Bonded Assembly

  Sergey Smirnov, Dmitry Konovalov, Irina Veretennikova, Aleksander Pestov, Viktoria Osipova

  Requires Subscription PDF Requires Subscription Visual Abstract

  311-325

• Evaluation of rheological performance of a local modified bitumen by Styrene Butadiene Styrene polymer used in wearing course

  Kebaili Kebaili; Mohammed Boucherba, Mohamed Djouhri, Mustapha Kebaili

  Requires Subscription PDF Requires Subscription Visual Abstract

  65-76

• Finite Element analysis of stress state in the cement of total hip prosthesis with elastomeric stress barrier

  Allaoua Fadela , Lebbal Habib, Belarbi Abderrahmane

  Requires Subscription PDF Requires Subscription Visual Abstract

  281-290

• Evaluation of the behaviour of reinforced concrete beams repaired with glass fibre reinforced polymer (GFRP) using a damage variable

  Rafael Cunha, Kevin Oliveira, Antônio Brito, Camila Vieira, David Amorim

  Requires Subscription PDF Requires Subscription Visual Abstract

  82-92

• Impact response of different materials for sports mouthguards

  Maria Moreira, João Carlos Ramos, Ana Messias, Maria Augusta Neto, Ana Paula Amaro, Paulo NB Reis

  Requires Subscription PDF Requires Subscription Visual Abstract

  63-69

• Preliminary results on the effects of orthopedic implant stiffness fixed to the cut end of the femur on the stress at the stump-prosthetic interface

  Ismail Boudjemaa, A. Sahli, A. Benkhettou, S. Benbarek

  Requires Subscription PDF Requires Subscription Visual Abstract

  160-168

• Strain Energy Density as Failure Criterion for Quasi-Static Uni-axial Tensile Loading

  Andrea Kusch, Simone Salamina, Daniele Crivelli, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  331-349

• Effect of multi-layer prosthetic foam liner on the stresses at the stump–prosthetic interface

  Ismail Boudjemaa, Abderahmane Sahli, Abdelkader Benkhettou, Smail Benbarek

  Requires Subscription PDF Requires Subscription Visual Abstract

  187-194

• Exploitation of static and dynamic methods for the analysis of the mechanical nanoproperties of polymethylmetacrylate by indentation

  Soufiane Benaissa, Samir Habibi, Djameleddine Semsoum, Hassen Merzouk, Abdelnou Mezough, Bénali Boutabout, Alex Montagne

  Requires Subscription PDF Requires Subscription Visual Abstract

  46-55

• Investigation on influence of SiCp on three-body abrasive wear behaviour of glass/epoxy composites

  Ajith Joshi, S. Basavarajappa, S. Ellangovan, B.M Jayakumar

  Requires Subscription PDF Requires Subscription Visual Abstract

  65-73

• Parametric Study Of Friction Stir Spot Welding (FSSW) For Polymer Materials Case Of High Density Polyethylene Sheets: Experimental And Numerical Study

  Djilali Benyerou, El Bahri Ould Chikh, Habib Khellafi, Hadj Miloud Meddah, Ali Benhamena, Kaddour Hachelaf, Abdellah Lounis

  Requires Subscription PDF Requires Subscription Visual Abstract

• Physical Parameters of Polymer Composite Materials Created on the Basis of Low and High Molecular Weight Rubbers

  E. Nurullaev, N. Y. Lyubimova, T. A. Gertsen

  Requires Subscription PDF Requires Subscription Visual Abstract

  134-140

• Experimental Analysis of the Physical Degradation of Polymers – The Case of Polymethyl Methacrylate

  Afaf Kaddouri, Boualem Serier, Khacem Kaddouri, Mohamed Belhouari

  Requires Subscription PDF Requires Subscription Visual Abstract

  66-80

• Fatigue Analysis of Bitumen Modified with Composite of Nano-SiO2 and Styrene Butadiene Styrene Polymer

  Sajad Rezaei, Seyed Mohsen Damadi, Ali Edrisi, Mansour Fakhri, Mohammad Worya Khordehbinan

  Requires Subscription PDF Requires Subscription Visual Abstract

  202-209

• Evaluating Properties of Asphalt Mixtures Containing polymers of Styrene Butadiene Rubber (SBR) and recycled Polyethylene Terephthalate (rPET) against Failures Caused by Rutting, Moisture and Fatigue

  Mahmoud Ameri, Reza Mohammadi, Milad Mousavinezhad, Amirhossein Ameri, Hamid Shaker, Arash Fasihpour

  Requires Subscription PDF Requires Subscription Visual Abstract

  177-186

• Finte element modeling of the behavior of polymethyl-methacrylate (PMMA) during high pressure torsion process.

  Ahmed Drai, Benaoumeur Aour, Naima Belayachi, Abderrahim Talha, Noureddine Benseddiq

  Requires Subscription PDF Requires Subscription Visual Abstract

  181-196

• Analysis of Printed Circuit Boards strains using finite element analysis and digital image correlation

  Liviu Marsavina, Alexandru Falk, Octavian Pop

  Requires Subscription PDF Requires Subscription Visual Abstract

  541-551

• Local scale fracture characterization of an advanced structured material manufactured by fused deposition modeling in 3D printing.

  Joseph Marae Djouda, Donato Gallittelli , Marouene Zouaoui, Ali Makke, Julien Gardan , Naman Recho, Jérôme Crépin

  Requires Subscription PDF Requires Subscription Visual Abstract

  534-540

• Numerical investigation of the effect of constrained groove pressing process on the mechanical properties of polyamide PA66

  Mohammed Salah Bennouna, Sadek Kaddour, Benaoumeur Aour, Nadir Damba

  Requires Subscription PDF Requires Subscription Visual Abstract

  254-266

• NURBS-based kinematic limit analysis of FRP-reinforced masonry walls with out-of-plane loading

  Andrea Chiozzi, Nicola Grillanda, Gabriele Milani, Antonio Tralli

  Requires Subscription PDF Requires Subscription Visual Abstract

  9-23

• Double initial and caustic curves in diametrically compressed transparent discs - Application to the contact length

  Christos Markides

  Requires Subscription PDF Requires Subscription Visual Abstract

  451-470