Composites

All Items

• Effect of nano-clay addition and heat-treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy

  Mohammad Azadi, Adel Basiri, Ali Dadashi, G. Winter, B. Seisenbacher, F. Grün

  Requires Subscription PDF Requires Subscription Visual Abstract

  373-397

• Behavior of Structural Concrete Frames with Hybrid Reinforcement under Cyclic Loading

  Asmaa Sobhy, Louay Aboul Nour, Hilal Hassan, Alaaeldin Elsisi

  Requires Subscription PDF Requires Subscription Visual Abstract

  70-81

• Parametric study of I-shaped shear connectors with different orientations in push-out test

  Boursas Farid, Djamel Boutagouga

  Requires Subscription PDF Requires Subscription Visual Abstract

  24-39

• Evaluation of the survivability of CFRP honeycomb-cored panels in compression after impact tests

  Oleg Staroverov, Elena Strungar, Valery Wildemann

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-15

• Effect of addition of different reinforcements on the microstructure and mechanical characterization of the Al-Flyash composites

  Milind K. Wasekar, Mohan P. Khond

  Requires Subscription PDF Requires Subscription Visual Abstract

  217-228

• Effects of coarse sand dosage on the physic-mechanical behavior of sand concrete

  Saloua Melais, Meriem Fakhreddine Bouali, Ahmed Melaikia, Amine Amirat

  Requires Subscription PDF Requires Subscription Visual Abstract

  151-159

• Study of mechanical behavior by fatigue of a cracked plate repaired by different composite patches

  Abdelmadjid Moulgada, Djafar Ait kaci, Mohammed El Sallah Zagane, Sahli Abderrahmane, Rachid Zahi

  Requires Subscription PDF Requires Subscription Visual Abstract

  195-202

• Influence of the applied layer on the state of stress in a bimetallic perforated plate under two load variants

  Mateusz Konieczny, Grzegorz Gasiak, Henryk Achtelik

  Requires Subscription PDF Requires Subscription Visual Abstract

  137-150

• Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques

  M. Ravikumar, R. Suresh, H. N. Reddappa, Y. S. Ram Mohan, C. R. Nagaraja, E. R. Babu

  Requires Subscription PDF Requires Subscription Visual Abstract

  160-170

• Investigation on influence of SiCp on three-body abrasive wear behaviour of glass/epoxy composites

  Ajith Joshi, S. Basavarajappa, S. Ellangovan, B.M Jayakumar

  Requires Subscription PDF Requires Subscription Visual Abstract

  65-73

• On the effect of stiffness/softness and morphology of interphase phase on the effective elastic properties of three-phase composite material

  Fedaoui Kamel, Lazhar Baroura, Karim Arar, Hichem Amrani, Mohamed said Boutaani

  Requires Subscription PDF Requires Subscription VIsual Abstract

  36-49

• Mechanical characterization of different epoxy resins enhanced with carbon nanofibers

  Paulo Sérgio Pina dos Santos, A. Maceiras, S. Valvez, P.N.B. Reis

  Requires Subscription PDF Requires Subscription Visual Abstract

  198-212

• An innovative fixture for testing the crashworthiness of composite materials

  Lorenzo Vigna, Iman Babaei, Ravin Garg, Giovanni Belingardi, Davide Salvatore Paolino, Andrea Calzolari, Giuseppe Galizia

  Requires Subscription PDF Requires Subscription Visual Abstract

  76-87

• Research of stress distribution in the cross-section of a bimetallic perforated plate perpendicularly loaded with concentrated force

  Mateusz Konieczny, Henryk Achtelik, Grzegorz Gasiak

  Requires Subscription PDF Requires Subscription Visual Abstract

  241-257

• Analytical solution for statif bending analyses of functionally grades plates with porosities

  Slimane Merdaci, Adda Hadj Mostefa, Youcef Beldjelili, Mohamed Merazi, Sabrina Boutaleb, Hadjira Hellal

  Requires Subscription PDF Requires Subscription Visual Abstract

• Experimental studies of different quenching media on mechanical and wear behavior of Al7075/SiC/Al2O3 hybrid composites

  Ravikumar, H.N. Reddappa, R. Suresh, M. Sreenivasa Reddy

  Requires Subscription PDF Requires Subscription Visual Abstract

  20-31

• Experimental analysis of the state of stress in a steel – titanium perforated plate loaded with concentrated force

  Mateusz Konieczny, Grzegorz Gasiak, Henryk Achtelik

  Requires Subscription PDF Requires Subscription Visual Abstract

  277-288

• Analysis of strengthened short deficient rubberized concrete-filled steel tubular columns

  Fady Elshazly, Suzan Mustafa, Hesham Fawzy

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-19

• Modeling of CFRP strengthened RC beams using the SNSM technique, proposed as an alternative to NSM and EBR techniques

  Adel Boulebd, Ferhoune Noureddine, Boukhezar Mohcene, Habib Abdelhak Mesbah

  Requires Subscription PDF Requires Subscription Visual Abstract

  21-35

• Finite element analysis of the behavior of bonded composite patches repair in aircraft structures

  Islam El-Sagheer, Mai Taimour, Mariam Mobtasem, Amr Abd-Elhady , Hossam El-Din M. Sallam

  Requires Subscription PDF Requires Subscription Visual Abstract

  128-138

• Investigation of the effect of impact load on concrete-filled steel tube columns under fire

  Ali Golsoorat Pahlaviani, Ali Mohammad Rousta, Peyman Beiranvand

  Requires Subscription PDF Requires Subscription Visual Abstract

  317-324

• Numerical analysis of reinforced concrete beams pre cracked reinforced by composite materials

  Fatima Benaoum, Foudil Khelil, Ali Benhamena

  Requires Subscription PDF Requires Subscription Visual Abstract

  282-296

• Mathematical data processing according to digital image correlation method for polymer composites

  Dmitriy Lobanov, Elena Strungar

  Requires Subscription PDF Requires Subscription Visual Abstract

  56-65

• Numerical and Experimental Analysis of Stacking Sequences Effects in Composite Mechanical Joints under Impact Loadings

  Pourya Fathi, Alireza Naddaf Oskouei, Khodadad Vahedi, Amin Moslemi Petrudi

  Requires Subscription PDF Requires Subscription Visual Abstract

  457-473

• The Effect of corrosion on the quality repair of the aluminum alloy A 5083 H11 by bonded composites

  Sadek Kaddour, Benaoumeur Aour, Mohammed Salah Bennouna, Abderrahim Talha, Belabbes Bachir Bouiadjra, Morad fari bouanani

  Requires Subscription PDF Requires Subscription Visual Abstract

  51-65