Fracture under Mixed-Mode and Multiaxial Loading

All Items

• Failure analysis of compressed earth block using numerical plastic damage model

  Samir Bouhiyadi, Laidi Souinida, Youssef El hassouani

  Requires Subscription PDF Requires Subscription Visual Abstract

  634-659

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  Requires Subscription PDF Requires Subscription Visual Abstract

  26-53

• Influence of hBN and MoS2 fillers on toughness and thermal stability of carbon fabric-epoxy composites

  Mr. Yermal Shriraj Rao, Dr. B. Shivamurthy, Dr. Nanjangud Subbarao Mohan, Dr. Nagaraja Shetty

  Requires Subscription PDF Requires Subscription Visual Abstract

  240-260

• Numerical Analysis of the Crack Growth Path in the Cement of Hip Spacers

  Sahnoun Zengah, Abdeljelil Mankour, Sahli Abderahmane, Hichem Salah, Abdelhafid Mallek, Mohammed Mokhtar Bouziane

  Requires Subscription PDF Requires Subscription Visual Abstract

  266-281

• Mode I stress intensity factor with various crack types

  Ehab Samir Mohamed Mohamed Soliman

  Requires Subscription PDF Requires Subscription Visual Abstract

  471-485

• Influence of Oxidation on Fracture Toughness of Carbon-Carbon Composites for High-Temperature Applications

  Sunil Kumar B.V., Neelakantha V. Londe, M. Lokesha, S.N. Vasantha Kumar, A.O. Surendranathan

  Requires Subscription PDF Requires Subscription Visual Abstract

  105-113

• Experimental investigation of cracking behaviors of ductile and brittle rock-like materials

  Hao Bai, Wei Du, Yundong Shou, Lichuan Chen, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  16-45

• Influence of different loading paths on the multiaxial fatigue behavior of 2024 aluminum alloy under the same amplitude values of the second invariant of the stress deviator tensor

  Andrey Yankin, A.I. Mugatarov, V.E. Wildemann

  Requires Subscription PDF Requires Subscription Visual Abstract

  327-335

• Finite element analysis of the behavior of bonded composite patches repair in aircraft structures

  Islam El-Sagheer, Mai Taimour, Mariam Mobtasem, Amr Abd-Elhady , Hossam El-Din M. Sallam

  Requires Subscription PDF Requires Subscription Visual Abstract

  128-138

• Plastic stress intensity factor behavior at small and large scale yielding

  Alexander Zakharov, Valery Shlyannikov, Anastasia Tartygasheva

  Requires Subscription PDF Requires Subscription Visual Abstract

  223-235

• Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging

  Andrew Gryguc, Sugrib Kumar Shaha, Seyed Behzad Behravesh, Hamid Jahed, Mary Wells, Bruce Williams

  Requires Subscription PDF Requires Subscription Visual Abstract

  152-165

• Stress intensity factors for mixed-mode crack growth in imitation models under biaxial loading

  Rustam Yarullin, V.N. Shlyannikov, I.S. Ishtyriakov, M.M. Yakovlev

  Requires Subscription PDF Requires Subscription Visual Abstract

  210-222

• Glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode(I/II) load using FPB specimen

  Abilash Desai, C. M. Sharanaprabhu, S. K. Kudari

  Requires Subscription PDF Requires Subscription Visual Abstract

  426-433

• Influence of static mean stresses on the fatigue behavior of 2024 aluminum alloy under multiaxial loading

  Andrey Yankin, Valerii Wildemann, Nikolai Belonogov, Oleg Staroverov

  Requires Subscription PDF Requires Subscription Visual Abstract

  151-163

• The effect of fatigue crack rate on the heat dissipation in metals under mixed-mode loading

  Aleksei Vshivkov, Oleg Plekhov

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-9

• Mixed mode fracture: numerical evaluation and experimental validation using PMMA specimens

  Sérgio Alexandre Gonçalves Pereira, Sérgio M.O. Tavares, Paulo M.S.T. de Castro

  Requires Subscription PDF Requires Subscription Visual Abstract

  412-428

• Averaged strain energy density estimated rapidly from the nodal stresses by FEM for cracks under mixed mode loadings including the T-stress contribution

  Giovanni Meneghetti, Alberto Campagnolo, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  53-64

• Stress Intensity Factor Solutions for CTS Mixed Mode Specimen

  Fernando Ventura Antunes, Ricardo Branco, José António Martins Ferreira, Luís Borrego

  Requires Subscription PDF Requires Subscription Visual Abstract

  676-692

• Evaluation of mixed mode (I/II) notch stress intensity factors of sharp V-notches using point substitution displacement technique

  Mirzaul Karim Hussain, K.S.R.K. Murthy

  Requires Subscription PDF Requires Subscription Visual Abstract

  599-610

• Multi-axial fatigue numerical crack propagation in cruciform specimens

  Venanzio Giannella, Michele Perrella

  Requires Subscription PDF Requires Subscription Visuall Abstract

  639-647

• Damage evaluation under complex fatigue loading conditions

  Luis Reis, Joao Caxias, Henrique Soares, Pedro R. Costa, Vitor Anes, Manuel Freitas

  Requires Subscription PDF Requires Subscription Visual Abstract

  318-331

• Initial orientation of the fretting fatigue cracks in shrink-fit connection specimens

  Ciro Santus

  Requires Subscription PDF Requires Subscription Visual Abstract

  442-450

• Validation of fracture envelopes of structural adhesives for mixed-mode strength prediction of bonded joints

  Raul Campilho, João Ribeiro, Ricardo Rocha, Alberto Leal, Filipe Viana

  Requires Subscription PDF Requires Subscription Visual Abstract

  332-347

• Algorithm for automatic fatigue crack growth simulation on welded high strength steels

  Ricardo Miguel Gomes Simões Baptista, Virginia Infante, João Marques

  Requires Subscription PDF Requires Subscription Visual Abstract

  257-268

• Cruciform specimens used for determination of the influence of T-stress on fatigue crack growth with overloads on aluminum alloy Al 6061 T651

  Sebastian Henkel, Carl H. Wolf, Horst Biermann, Andreas Burgold, Meinhard Kuna

  Requires Subscription PDF Requires Subscription Visual Abstract

  135-143

• The effect of creep damage model formulation on crack path prediction

  Valery Shlyannikov, Andrey Tumanov

  Requires Subscription PDF Requires Subscription Visual Abstract

  77-86

• The experimental study of heat dissipation during fatigue crack propagation under biaxial loading

  Aleksei Vshivkov, Oleg Plekhov, Anastasiia Iziumova, Aleksandr Zakharov, Valery Shlyannikov

  Requires Subscription PDF Requires Subscription Visual Abstract

  50-57

• Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading

  Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  18-25

• Comparison of tensile strength and fracture toughness under mode I and II loading of co-cured and co-bonded CFRP joints

  Alessandro Pirondi, Fabrizio Moroni, Chiara Pernechele, Arturo Gaita, Luca Vescovi

  Requires Subscription PDF Requires Subscription Visual Abstract

  294-302

• The “Projection-by-Projection” (PbP) criterion for multiaxial random fatigue loadings

  Denis Benasciutti, Davide Zanellati, Alessandro Cristofori

  Requires Subscription PDF Requires Subscription Visual Abstract

  348-366

• Elastoplastic and fracture behaviour of semi-crystalline polymers under multiaxial stress states

  Joao Pedro Manaia, Abílio M.P. Jesus, Francisco A. Pires

  Requires Subscription PDF Requires Subscription Visual Abstract

  82-103

• A progessive damage fatigue model for unidirectional laminated composites based on finite element analysis

  Michael Hack, D. Carrella-Payan, B. Magneville, T. Naito, Y. Urushiyama, W. Yamazaki, T. Yokozeki, W. Van Paepegem

  Requires Subscription PDF Requires Subscription Visual Abstract

  54-61

• Multiaxial fatigue of in-service aluminium longerons for helicopter rotor-blades

  A. Shanyavskiy, A. Toushentsov

  Requires Subscription PDF

  Pages 399-404

• Mechanical behavior of wood subjected to mode II fracture, using an energetic criterion: Application on THUJA of Morocco

  Amal Saoud, Abdelhamid Elamri, Khadija Kimakh, Mohsine Ziani, Moussa Elmatar

  Requires Subscription PDF

  25-34

• The Effects of Shear on Mode II Delamination

  Paolo Sebastiano Valvo

  Requires Subscription PDF

  123-139

• The effect of loading rate on fracture energy of asphalt mixture at intermediate temperatures and under different loading modes

  M.R.M. Aliha, M. Fakhri, E. Haghighat Kharrazi, F. Berto

  Requires Subscription PDF

  Pages 113-132

• Experimental characterization of interlaminar fracture toughness of composite laminates assembled with three different carbon fiber lamina

  Domenico Gentile

  Requires Subscription PDF

  Pages 155-170

• Evaluation of mixed mode I/II fracture toughness of C 50/60 from Brazilian disc test

  Stanislav Seitl, Petr Miarka

  Requires Subscription PDF

  Pages 119-127

• Mode II brittle fracture: recent developments

  A. Campagnolo, S.M.J. Razavi, M. Peron, J. Torgersen, F. Berto

  Requires Subscription PDF

  Pages 181-188

• The fatigue behavior of V-notches in presence of residual stresses: recent developments and future outcomes

  P. Ferro, M. Peron, S.M.J. Razavi, F. Berto, J. Torgersen

  Requires Subscription PDF

  Pages 189-195

• Multiaxial fatigue property of type 316 stainless steel using hollow cylinder specimen under combined pull loading and inner pressure

  Takahiro Morishita, Yuta Takada, Takamoto Itoh

  Requires Subscription PDF

  Pages 71-78

• Simple criterion for predicting fatigue life under combined bending and torsion loading

  K. Slámecka, J. Pokluda

  Requires Subscription PDF

  Pages 123-128

• On the applicability of Miner’s rule for multiaxial fatigue life calculations under non-proportional load histories

  Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Samuel Elias Ferreira, Hao Wu

  Requires Subscription PDF

  Pages 98-105

• The effect of creep damage formulation on crack tip fields, creep stress intensity factor and crack growth assessments

  V. Shlyannikov, A. Tumanov

  Requires Subscription PDF

  Pages 285-292

• Multiaxial fatigue strength of titanium alloys

  Filippo Berto, Alberto Campagnolo, Torgeir Welo, Sabrina Vantadori, Andrea Carpinteri

  Requires Subscription PDF

  Pages 79-89

• Notched multiaxial fatigue of Al7050-T7451: on the need for an equivalent process zone size

  M.V.C Sá, J.L.A Ferreira, C.R.M da Silva, J.A. Araújo

  Requires Subscription PDF

  Pages 90-97

• Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue

  Andrea Carpinteri, Giovanni Fortese, Camilla Ronchei, Daniela Scorza, Sabrina Vantadori, Filippo Berto

  Requires Subscription PDF

  Pages 66-70

• On the connection between mode II and mode III effective thresholds in metals

  Tomas Vojtek, Stanislav Zak, Jaroslav Pokluda

  Requires Subscription PDF

  Pages 245-251

• Sharp three-dimensional notches under combined nominal normal and shear fatigue loading

  M. Vormwald, E. Shams

  Requires Subscription PDF

  Pages 114-122

• Evaluation of new multiaxial damage parameters on low carbon steel

  A. S. Cruces, P. Lopez-Crespo, B. Moreno, A. Lopez-Moreno, S. Suman

  Requires Subscription PDF

  Pages 54-61