Analytical, computational and physical Models

All Items

• A Novel Method to Estimate the Damage Severity Using Spatial Wavelets and Local Regularity Algorithm

  Mallikarjuna Reddy, Arun Kumar K

  Requires Subscription PDF Requires Subscription Visual Abstract

  36-55

• Bi-level Hybrid Uncertainty Quantification in Fatigue Analysis: S-N Curve Approach

  Raphael Basilio Pires Nonato

  Requires Subscription PDF Requires Subscription Visual Abstract

  88-103

• Modeling of CFRP strengthened RC beams using the SNSM technique, proposed as an alternative to NSM and EBR techniques

  Adel Boulebd, Ferhoune Noureddine, Boukhezar Mohcene, Habib Abdelhak Mesbah

  Requires Subscription PDF Requires Subscription Visual Abstract

  21-35

• Effect of Stiffener Characteristics on the Seismic Behavior and Fracture Tendency of Steel Shear Walls

  Osman Shallan , Hassan Maaly, Mohammed Elgiar, Alaaeldin Elsisi

  Requires Subscription PDF Requires Subscription Visual Abstract

  104-115

• Numerical analysis of circular and square section concrete filled aluminum tubes under axial compression

  Pan Jinlong, Li Guanhua, Jingming Cai

  Requires Subscription PDF Requires Subscription Visual Abstract

  169-181

• Strain-gradient effect on the crack tip dislocations density

  Valery Shlyannikov; Andrey Tumanov; Ruslan Khamidullin

  Requires Subscription PDF Requires Subscription Visual Abstract

  192-201

• Numerical analysis of reinforced concrete beams pre cracked reinforced by composite materials

  Fatima Benaoum, Foudil Khelil, Ali Benhamena

  Requires Subscription PDF Requires Subscription Visual Abstract

  282-296

• A closed form for the Stress Intensity Factor of a small embedded square-like flaw

  Paolo Livieri, Fausto Segala

  Requires Subscription PDF Requires Subscription Visual Abstract

  182-191

• A new approach of CMT seam welding deformation forecasting based on GA-BPNN

  Yao Lu, Yanfeng Xing, Xuexing Li, Sha Xu

  Requires Subscription PDF Requires Subscription Visual Abstract

  325-336

• Comparative study of the repair of cracked plates with two different composite patches

  Moulgada Abdelmadjid, Zagane Mohammed El Sallah, Sahli Abderahmane, Ait kaci Djafar, Zahi Rachid

  Requires Subscription PDF Requires Subscription Visual Abstract

  187-201

• An analytical beam model for the evaluation of crack tip root rotations and displacements in orthotropic specimens

  Ilaria Monetto, Roberta Massabò

  Requires Subscription PDF Requires Subscription Visual Abstract

  372-393

• Low cycle fatigue damage model and sensitivity analysis of fatigue crack initiation by finite element approach

  Zhiqiang Wang, Xiaoguang Huang, Dian-hao Zhang

  Requires Subscription PDF Requires Subscription Visual Abstract

  81-91

• Forecasting bearing capacity of the mixed soil using artificial neural networking

  Abdoullah Namdar

  Requires Subscription PDF Requires Subscription Visual Abstract

  285-294

• Effect of different parameters controlling the flexural behavior of RC beams strengthened with NSM using nonlinear finite element analysis

  Ramy Mostafa Reda, Zeinab Omar, Hossam Sallam, Seleem S. E. Ahmad

  Requires Subscription PDF Requires Subscription Visual Abstract

  106-123

• Finite element analysis of the interface defect in ceramic-metal assemblies: Alumina-Silver

  Bouafia Farida, Lamia Hadid, Boualem Serier, Sardar Sikandar Hayat

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-12

• Code development for the computational analysis of crack propagation in structures

  Antonios Chatzigeorgiou, Efstathios Theotokoglou, George I. Tsamasphyros

  Requires Subscription PDF Requires Subscription Visual Abstract

  306-324

• Fatigue Life Simulation and Analysis of Aluminum Alloy Sheet Self-piercing Riveting

  Qingchun Zheng, Naixin Wang, Peihao Zhu, Jingna Liu, Wenpeng Ma

  Requires Subscription PDF Requires Subscription Visual Abstract

  141-151

• Longitudinal fracture analysis of inhomogeneous beams with continuously varying sizes of the cross-section along the beam length

  Victor Rizov, Holm Altenbach

  Requires Subscription PDF Requires Subscription Visual Abstract

  38-50

• Understanding powder bed fusion additive manufacturing phenomena via numerical simulation

  Paolo Ferro, Filippo Berto, Luca Romanin

  Requires Subscription PDF Requires Subscription Visual Abstract

  252-284

• Numerical Investigation of the Seismic Behavior of Unanchored Steel Tanks with an emphasis on the Uplift Phenomenon

  Jalal Akbari, Omid Salami, Mohsen Isari

  Requires Subscription PDF Requires Subscription Visual Abstract

  92-105

• Building crack monitoring based on digital image processing

  Yanyan Xu, Yanxia Cai, Dandan Li, Tierui Zhang

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-8

• Finte element modeling of the behavior of polymethyl-methacrylate (PMMA) during high pressure torsion process.

  Ahmed Drai, Benaoumeur Aour, Naima Belayachi, Abderrahim Talha, Noureddine Benseddiq

  Requires Subscription PDF Requires Subscription Visual Abstract

  181-196

• Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction

  Andrey Tumanov, V.N. Shlyannikov, A.P. Zakharov

  Requires Subscription PDF Requires Subscription Visual Abstract

  299-309

• Multiple Crack Detection using Wavelet Transforms and Energy Signal Techniques

  Jalal Akbari, Majid Ahmadifarid, Abbas Kazemi Amiri

  Requires Subscription PDF Requires Subscription Visual Abstract

  269-280

• Optimization design based approach for the determination and minimization of the displacement under tensile load in hybrid composite joint

  Sahli Abderahmane, Fouzia Merabbi, Abdelkader Lousdad, Abdelkader Megueni

  Requires Subscription PDF Requires Subscription VIsual Abstract

  281-298