Fatigue & Fatigue crack growth

All Items

• Fatigue behavior of pultruded fiberglass tubes under tension, compression and torsion

  Oleg Staroverov, Artur Mugatarov, Anastasia Sivtseva, Elena Strungar, Valeriy Wildemann, Aleksandr Elkin, Ivan Sergeichev

  Requires Subscription PDF Requires Subscription Visual Abstract

• On the stress- and strain-based fatigue behavior of welded thick-walled nodular cast iron

  Christoph Bleicher, Steffen Schoenborn, Heinz Kaufmann, Masoud Alizadeh-Sh

  Requires Subscription PDF Requires Subscription Visual Abstract

• Shapley additive explanation on machine learning predictions of fatigue lifetimes in piston aluminum alloys under different manufacturing and loading conditions

  Mohammad Azadi, Mahmood Matin

  Requires Subscription PDF Requires Subscription Visual Abstract

  357-370

• Uniaxial fatigue study of a natural-based bio-composite material reinforced with fique natural fibers

  Maria C. Chaves, Dayal Castro, Alberto David Pertuz Comas

  Requires Subscription PDF Requires Subscription Visual Abstract

  94-108

• Ultrasonic fatigue testing of AISI 304 and 316 stainless steels under environmental and immersion conditions

  Luis M. Torres Duarte, Gonzalo Mariano Domínguez Almaraz, Hipólito M. Venegas Montaño

  Requires Subscription PDF Requires Subscription Visual Abstract

  175-185

• Optimization of damage repair with piezoelectric actuators using the Taguchi method

  Abdul Aabid Shaikh, Meftah Hriari, Jaffar Syed Mohamed Ali

  Requires Subscription PDF Requires Subscription Visual Abstract

  137-152

• Multi-level Uncertain Fatigue Analysis of a Truss under Incomplete Available Information

  Raphael Basilio Pires Nonato

  Requires Subscription PDF Requires Subscription Visual Abstract

  17-37

• Fatigue life investigation of notched TC4 specimens subjected to different patterns of laser shock peening

  Anastasia Iziumova, Maxim Zhelnin, Anastasia Kostina, Aleksei Vshivkov, Elena Gachegova, Oleg Plekhov, S. Swaroop

  Requires Subscription PDF Requires Subscription Visual Abstract

  100-111

• Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

  H. Bahmanabadi, Mohammad Azadi, A. Dadashi, J. Torkian, M.S.A. Parast, G. Winter, F. Grün

  Requires Subscription PDF Requires Subscription Visual Abstract

  224-245

• Experimental and numerical inspection of cracks in ferrule cracking of BK1 cement crusher

  Sofiane Chorfi, Fedaoui Kamel, Necib Brahim

  Requires Subscription PDF Requires Subscription Visual Abstract

  47-58

• The Metallurgical hydrogen as an indicator and cause of damage to rolled steel

  Vladimir Polyanskiy, Victor Loginov, Yuriy A. Yakovlev, Anatoly Polyanskiy, Vecheclav Olekov, Gregory Rostovykh

  Requires Subscription PDF Requires Subscription Visual Abstract

  301-308

• Analysis of the resistance to crack propagation in SENT test specimens printed in ABS using parallel or crossed filaments between layers

  Oumaima Aourik, Abdelkerim Chouaf, Mourad Othmani

  Requires Subscription PDF Requires Subscription Visual Abstract

  246-256

• Deep Learning algorithm for the assessment of the first damage initiation monitoring the energy release of materials

  Dario Milone, Dario Santonocito

  Requires Subscription PDF Requires Subscription Visual Abstract

  505-515

• Quantitative description of low-cycle fatigue damage accumulation in contact interaction zone by local strain evolution

  Sviatoslav Eleonsky, Yury Matvienko, Vladimir Pisarev, Igor Odintsev

  Requires Subscription PDF Requires Subscription Visual Abstract

  541-560

• Multiple linear regression parameters for determining fatigue-based entropy characterisation of magnesium alloy

  Mohd 'Akashah Fauthan, Shahrum Abdullah, Mohamad Faizal Abdullah, Intan Fadhlina Mohamed

  Requires Subscription PDF Requires Subscription Visual Abstract

  289-303

• Heat dissipation and fatigue crack kinetic features of titanium alloy Grade 2 after laser shock peening

  Anastasia Iziumova, Aleksei Vshivkov, Aleksandr Prokhorov, Elena Gachegova, Denis Davydov

  Requires Subscription PDF Requires Subscription Visual Abstract

  516-526

• Predicting Fatigue Crack Growth Behavior of Coalesced Cracks Using the Global-Local Superimposed Technique

  Mohd Shamil Shaari, Sylvia Urai, Professor Takahashi, Mohd Akramin Mohd Romlay

  Requires Subscription PDF Requires Subscription Visual Abstract

  150-167

• Detection of Uniaxial Fatigue Stress under Magnetic Flux Leakage Signals using Morlet Wavelet

  Syed Muhamad Firdaus, Azli Arifin, Shahrum Abdullah, Salvinder Singh Karam Singh, Noorsuhada Md Nor

  Requires Subscription PDF Requires Subscription Visual Abstract

  254-265

• Couple effects of temperature and fatigue, creep-fatigue interaction and thermo-mechanical loading conditions on crack growth rate of nickel-based alloy

  Valery Shlyannikov, Aleksandr Inozemtsev, Aleksey Ratchiev

  Requires Subscription PDF Requires Subscription Visual Abstract

  46-58

• Fatigue growth rate of inclined surface cracks in aluminum and titanium alloys

  Rustam Yarullin, Mikhail Yakovlev

  Requires Subscription PDF Requires Subscription Visual Abstract

  451-463

• Investigation fatigue crack initiation and propagation cruciform welded joints by extended finite element method (XFEM) and implementation SED approach

  Hamza Djeloud, Mustafa Moussaoui, Ahmed Kellai, Dahmane Hachi, Filippo Berto, Benattou Bouchouicha, Brahim Elkhalil Hachi

  Requires Subscription PDF Requires Subscription Visual Abstract

  346-362

• Fatigue crack growth analysis of welded bridge details

  Danilo D'Angela, Marianna Ercolino

  Requires Subscription PDF Requires Subscription Visual Abstract

  265-272

• Influence of the interphase between laser-cladded metal layer and steel substrate on fatigue propagation of a short edge crack

  Lucie Malikova, Pavel Doubek, Petr Miarka, Stanislav Seitl

  Requires Subscription PDF Requires Subscription Visual Abstract

  514-524

• Fatigue strength evaluation of PPGF35 by energy approach during mechanical tests

  Giacomo Risitano

  Requires Subscription PDF Requires Subscription Visual Abstract

  537-548

• A probabilistic fatigue crack growth life approach to the definition of inspection intervals for railway axles

  C. Mallor, S. Calvo, J.L. Nuñez, R. Rodriguez-Barrachina, A. Landaberea

  Requires Subscription PDF Requires Subscription Visual Abstract

  359-373

• Novel 2D strain-rate-dependent lamina-based and RVE/phase-based progressive fatigue damage criteria for randomly loaded multi-layer fiber-reinforced composites

  M. Shariyat

  Requires Subscription PDF Requires Subscription Visual Abstract

  423-443

• Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method

  Sviatoslav Eleonsky, Yuri Matvienko , Vladimir Pisarev, Michael Zajtsev

  Requires Subscription PDF Requires Subscription Visual Abstract

  115-128

• Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation

  Daniele Rigon, Filippo Berto, Giovanni Meneghetti

  Requires Subscription PDF Requires Subscription Visual Abstract

  525-536

• Influence of themo-mechanical treatments and microstructural state on the fatigue behaviour of a weald seam: case of API X60 steel

  Mohammed Achoui , Fethi Sebaa, Benattou Bouchouicha

  Requires Subscription PDF Requires Subscription Visual Abstract

  365-375

• A new methodology to predict damage tolerance based on compliance via global-local analysis

  Gilberto Gomes, Thiago Oliveira, Alvaro Martins

  Requires Subscription PDF Requires Subscription Visual Abstract

  211-230

• Asymptotic response of friction stir welded joint under cyclic loading

  Imane Elmeguenni

  Requires Subscription PDF Requires Subscription Visual Abstract

  202-210

• Bending cyclic behavior and scatter-band analysis of aluminum alloys under beneficial and detrimental conditions through high-cycle fatigue regime

  Mohammad Azadi, Hanieh Aroo

  Requires Subscription PDF Requires Subscription Visual Abstract

  272-281

• Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model

  Mohammed Bentahar, Habib Benzaama, Mahmoudi Noureddin

  Requires Subscription PDF Requires Subscription Visual Abstract

  182-194

• Effect of nano-clay addition and heat-treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy

  Mohammad Azadi, Adel Basiri, Ali Dadashi, G. Winter, B. Seisenbacher, F. Grün

  Requires Subscription PDF Requires Subscription Visual Abstract

  373-397

• A brief review of fatigue design criteria on offshore wind turbine support structures

  Paulo Mendes, José A.F.O. Correia, Abílio M.P. De Jesus, Bianca Ávila, Hermes Carvalho, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  302-315

• Influence of different loading paths on the multiaxial fatigue behavior of 2024 aluminum alloy under the same amplitude values of the second invariant of the stress deviator tensor

  Andrey Yankin, A.I. Mugatarov, V.E. Wildemann

  Requires Subscription PDF Requires Subscription Visual Abstract

  327-335

• Fatigue loading characteristic for the composite steel-concrete beams

  Ahmed I.Hassanin, Hesham M. Fawzy, Ahmed I. Elsheikh

  Requires Subscription PDF Requires Subscription Visual Abstract

  110-118

• Influence of stress ratio on residual stress evolution near cold-expanded hole due to low-cycle fatigue by crack compliance data

  Andrey Chernov, Sviatoslav Eleonsky, Vladimir Pisarev

  Requires Subscription PDF Requires Subscription Visual Abstract

  174-186

• Mechanical performance of intelligent asphalt mixture utilizing rejuvenator encapsulated method

  Sari Sharif Ali, Mahyar Arabani, Hassan Latifi

  Requires Subscription PDF Requires Subscription Visual Abstract

  187-197

• Fatigue Behavior of Metallic Components Obtained by Topology Optimization for Additive Manufacturing

  F.K. Fiorentin, B. Oliveira, J.C.R. Pereira, J.A.F.O. Correia, Abilio M.P. de Jesus, F. Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  119-135

• Influence of contact parameters in fretting-fatigue contact 3D problems

  Fella Hamadouche, Habib Benzaama, Mohamed Mokhtari, Miloud Abbes Tahar

  Requires Subscription PDF Requires Subscription Visual Abstract

  228-240

• Bi-level Hybrid Uncertainty Quantification in Fatigue Analysis: S-N Curve Approach

  Raphael Basilio Pires Nonato

  Requires Subscription PDF Requires Subscription Visual Abstract

  88-103

• Numerical analysis of the influence of maximum residual thermal stresses on the intensity factor between the matrix and particle interfaces in metal matrix composite

  Taieb Nehari, Kaddour Bahram, Driss Nehari, Abdelfatah Marni Sandid

  Requires Subscription PDF Requires Subscription Visual Abstract

  275-281

• Investigation of the effect of impact load on concrete-filled steel tube columns under fire

  Ali Golsoorat Pahlaviani, Ali Mohammad Rousta, Peyman Beiranvand

  Requires Subscription PDF Requires Subscription Visual Abstract

  317-324

• Low cycle fatigue damage model and sensitivity analysis of fatigue crack initiation by finite element approach

  Zhiqiang Wang, Xiaoguang Huang, Dian-hao Zhang

  Requires Subscription PDF Requires Subscription Visual Abstract

  81-91

• Fatigue Life Simulation and Analysis of Aluminum Alloy Sheet Self-piercing Riveting

  Qingchun Zheng, Naixin Wang, Peihao Zhu, Jingna Liu, Wenpeng Ma

  Requires Subscription PDF Requires Subscription Visual Abstract

  141-151

• Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging

  Andrew Gryguc, Sugrib Kumar Shaha, Seyed Behzad Behravesh, Hamid Jahed, Mary Wells, Bruce Williams

  Requires Subscription PDF Requires Subscription Visual Abstract

  152-165

• Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy

  Carlos Navarro Pintado, Jesús Vázquez, Jaime Domínguez, Antonio Periñán, Marta Herrera García, Fernando Lasagni, Simon Bernarding, Sebastian Slawik, Frank Mücklich, Francisco Boby, Lloyd Hackel

  Requires Subscription PDF Requires Subscription Visual Abstract

  337-344

• Unified methodology for characterisation of global fatigue damage evolution in adhesively bonded joints

  Jaiswal Pankaj, Rahul Iyer Kumar, Wim De Waele

  Requires Subscription PDF Requires Subscription Visual Abstract

  26-37

• Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction

  Andrey Tumanov, V.N. Shlyannikov, A.P. Zakharov

  Requires Subscription PDF Requires Subscription Visual Abstract

  299-309