Failure Analysis, Case Studies and Forensic Engineering

All Items

• Reinforced Soft Soil by CSV with/without Polypropylene fibres: Experimental and Numerical analysis.

  Anouar Souadeuk, Zeineddine Boudaoud

  Requires Subscription PDF Requires Subscription Visual Abstract

  374-395

• Numerical analysis of the elastic-plastic behavior of a tubular structure in FGM under pressure and defect presence

  Kouider Madani, A. Houari, A.S. Bouchikhi, M. Mokhtari

  Requires Subscription PDF Requires Subscription Visual Abstract

  212-231

• Cracking Patterns of Brittle Hemispherical Domes: an Experimental Study

  Siwen Cao, Andras A. Sipos

  Requires Subscription PDF Requires Subscription Visual Abstract

  265-310

• Mode I stress intensity factor with various crack types

  Ehab Samir Mohamed Mohamed Soliman

  Requires Subscription PDF Requires Subscription Visual Abstract

  471-485

• Fracture analysis of AA6061-graphite composite for the application of helicopter rotor blade

  Saleemsab Doddamani, Chao Wang, M. Sheik Mohamed Jinnah, Md. Arefin Kowser

  Requires Subscription PDF Requires Subscription Visual Abstract

  191-201

• Damage identification in steel plate using FRF and inverse analysis

  Samir Khatir , Magd Abdel Wahab , Samir Tiachacht, Cuong Le Thanh , Roberto Capozucca, Erica Magagnini, Brahim Benaissa

  Requires Subscription PDF Requires Subscription Visual Abstract

  416-433

• Behavior of Structural Concrete Frames with Hybrid Reinforcement under Cyclic Loading

  Asmaa Sobhy, Louay Aboul Nour, Hilal Hassan, Alaaeldin Elsisi

  Requires Subscription PDF Requires Subscription Visual Abstract

  70-81

• Optimization of Ultimate Tensile Strength with DOE Approach for Application FSW Process in the Aluminum alloys AA6061-T651 & AA7075 -T651

  Mohammed Chaib , Abdelkader Slimane, Sid Ahmed Slimane , Abdelakder Ziadi , Benattou Bouchouicha

  Requires Subscription PDF Requires Subscription Visual Abstract

  169-181

• A Simplified ALE model for finite element simulation of ballistic impacts with bullet splash – development and experimental validation

  Riccardo Andreotti, Sergio Abate, Andrea Casaroli, Mauro Quercia, Riccardo Fossati, Marco V. Boniardi

  Requires Subscription PDF Requires Subscription Visual Abstract

  223-245

• Parametric study of I-shaped shear connectors with different orientations in push-out test

  Boursas Farid, Djamel Boutagouga

  Requires Subscription PDF Requires Subscription Visual Abstract

  24-39

• Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite

  Abdelmalek Regad, Djebara Benzerga, Habib Berrekia, Abdelkader Haddi , Nourredine Chekhar

  Requires Subscription PDF Requires Subscription Visual Abstract

  115-122

• Experimental investigation of cracking behaviors of ductile and brittle rock-like materials

  Hao Bai, Wei Du, Yundong Shou, Lichuan Chen, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  16-45

• Numerical analysis of underground tunnels subjected to surface blast loads

  Mahmoud Nawar, Alaa Ata, Marwa Nabil, Sally Hassan

  Requires Subscription PDF Requires Subscription Visual Abstract

  159-173

• Fatigue loading characteristic for the composite steel-concrete beams

  Ahmed I.Hassanin, Hesham M. Fawzy, Ahmed I. Elsheikh

  Requires Subscription PDF Requires Subscription Visual Abstract

  110-118

• Experimental and numerical optimization study of shock wave damping in aluminum panel sandwich

  Masoud Rahmani, Amin Moslemi Petrudi

  Requires Subscription PDF Requires Subscription Visual Abstract

  88-109

• Failure analysis and numerical simulation of slab carrying clamps

  Branislav Đorđević, Simon Sedmak, Drakče Tanasković, Marko Gajin, Filip Vučetić

  Requires Subscription PDF Requires Subscription Visual Abstract

  336-344

• Effect of thermomechanical processing defects on fatigue and fracture behaviour of forged magnesium

  Andrew Gryguc, S.B. Behravesh, H. Jahed, M. Wells, B. Williams, R. Gruber, A. Duquett, T. Sparrow, M. Lambrou, X. Su

  Requires Subscription PDF Requires Subscription Visual Abstract

  213-227

• Modeling of CFRP strengthened RC beams using the SNSM technique, proposed as an alternative to NSM and EBR techniques

  Adel Boulebd, Ferhoune Noureddine, Boukhezar Mohcene, Habib Abdelhak Mesbah

  Requires Subscription PDF Requires Subscription Visual Abstract

  21-35

• Probabilistic Elastic-plastic Fracture Mechanics Analysis of Propagation of Cracks in Pipes under Internal Pressure

  Belaïd Mechab, Mokadem Salem, Medjahdi Malika, Serier Boualem

  Requires Subscription PDF Requires Subscription Visual Abstract

  202-210

• Numerical Investigation of the Seismic Behavior of Unanchored Steel Tanks with an emphasis on the Uplift Phenomenon

  Jalal Akbari, Omid Salami, Mohsen Isari

  Requires Subscription PDF Requires Subscription Visual Abstract

  92-105

• Numerical and Experimental Analysis of Stacking Sequences Effects in Composite Mechanical Joints under Impact Loadings

  Pourya Fathi, Alireza Naddaf Oskouei, Khodadad Vahedi, Amin Moslemi Petrudi

  Requires Subscription PDF Requires Subscription Visual Abstract

  457-473

• Prediction of the burst pressure for defective pipelines using different semi-empirical models

  Sandip Budhe, S. de Barros, M. D. Banea

  Requires Subscription PDF Requires Subscription Visual Abstract

  137-147

• Probabilistic geotechnical engineering analysis based on first order reliability method

  Georgios Belokas

  Requires Subscription PDF Requires Subscription Visual Abstract

  354-369

• Characterization of stress-strain state in gas turbine engine compressor disc taking into account damage accumulation

  Natalia V Boychenko, Ivan Ishtyryakov

  Requires Subscription PDF Requires Subscription Visual Abstract

  54-67

• A plastic stress intensity factor approach to turbine disk structural integrity assessment

  V. Shlyannikov, A. Zakharov, R. Yarullin

  Requires Subscription PDF

  193-199