Creep

All Items

• Evaluating Properties of Asphalt Mixtures Containing polymers of Styrene Butadiene Rubber (SBR) and recycled Polyethylene Terephthalate (rPET) against Failures Caused by Rutting, Moisture and Fatigue

  Mahmoud Ameri, Reza Mohammadi, Milad Mousavinezhad, Amirhossein Ameri, Hamid Shaker, Arash Fasihpour

  Requires Subscription PDF Requires Subscription Visual Abstract

  177-186

• Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction

  Andrey Tumanov, V.N. Shlyannikov, A.P. Zakharov

  Requires Subscription PDF Requires Subscription Visual Abstract

  299-309

• Characterization of stress-strain state in gas turbine engine compressor disc taking into account damage accumulation

  Natalia V Boychenko, Ivan Ishtyryakov

  Requires Subscription PDF Requires Subscription Visual Abstract

  54-67

• Comparative study of Shot creep of single-phase titanium alloys in air and neutral gas environment on the test temperature in range from 673 to 1323 K

  lev Michailovich Zamaraev, Sergey Smirnov

  Requires Subscription PDF Requires Subscription Visual Abstract

  201-211

• The effect of creep damage model formulation on crack path prediction

  Valery Shlyannikov, Andrey Tumanov

  Requires Subscription PDF Requires Subscription Visual Abstract

  77-86

• Low cycle fatigue and creep-fatigue response of the 316Ti stainless steel

  S C S P Kumar Krovvidi, Sunil Goyal, A K Bhaduri

  Requires Subscription PDF Requires Subscription Visual Abstract

  577-584

• Experimental Research on the Instantaneous and Long-Term Deflections of Pre-Cracked Concrete Beams Enhanced by Carbon Fibre Reinforced Polymer

  Shiyong Jiang, Tao Cai, Shijuan Wu, Weilai Yao

  Requires Subscription PDF Requires Subscription Visual Abstract

  275-284

• A New Viscoelastic Mechanics Model for the Creep Behaviour of Fibre Reinforced Asphalt Concrete

  Chunshui Huang, Fangtao Wang, Tao Gao, Danying Gao

  Requires Subscription PDF Requires Subscription Visual Abstract

  108-120

• 15-15Ti(Si) austenitic steel: creep behaviour in hostile environment

  Alessandra Strafella, Antonino Coglitore, Paride Fabbri, Elena Salernitano

  Requires Subscription PDF Requires Subscription Audioslides

  Pages 352-365

• Creep behavior of V-notched components

  P. Gallo, S.M.J. Razavi, M. Peron, J. Torgersen, F. Berto

  Requires Subscription PDF

  Pages 456-463

• The effect of creep damage formulation on crack tip fields, creep stress intensity factor and crack growth assessments

  V. Shlyannikov, A. Tumanov

  Requires Subscription PDF

  Pages 285-292

• Creep-fatigue life evaluation of high chromium ferritic steel under non-proportional loading

  T. Morishita, Y. Murakami, T. Itoh, H. Tanigawa

  Requires Subscription PDF

  Pages 281-288

• Crack initiation behavior of notched specimens on heat resistant steel under service type loading at high temperature

  Lu Cui, Peng Wang

  Requires Subscription PDF

  Pages 26-35

• Paths of interactive cracks in creep conditions

  K. Nowak

  Requires Subscription PDF

• Modification of creep and low cycle fatigue behaviour induced by welding

  A. Carofalo, V. Dattoma, R. Nobile, F.W. Panella, G. Alfeo, A. Scialpi, G.P. Zanon

  Requires Subscription PDF

  pages 349-359

• High temperature initiation and propagation of cracks in 12%Cr-steel turbine disks

  S. Foletti, A. Lo Conte, S. Salgarollo, F. Bassi, A. Riva

  Requires Subscription PDF Requires Subscription Video Fig. 1 Requires Subscription Video Fig. 2a Requires Subscription Video Fig. 3 Requires Subscription Video Fig. 4 Requires Subscription Video Fig. 5 Requires Subscription Video Fig. 6

  Pages 123-131