Alloys: Steels

All Items

• A method for rapid estimation of residual stresses in metal samples produced by additive manufacturing

  Alexey Fedorenko, Denis Firsov, Stanislav Evlashin, Boris Fedulov, Evgeny Lomakin

  Requires Subscription PDF Requires Subscription Visual Abstract

  267-279

• Numerical investigation of an extra-deep drawing process with industrial parameters: formability analysis and process optimization

  Amina Belguebli, Ibrahim Zidane, Adel Hadj Amar, Abdessoufi Benhamou

  Requires Subscription PDF Requires Subscription Visual Abstract

  45-62

• Evolution of prototyping in automotive engineering: a Comprehensive Study on the reliability of Additive Manufacturing for advanced powertrain components

  Silvia Cecchel, Riccardo Ferraresi, Matteo Magni, Leonardo Guerini, Giovanna Cornacchia

  Requires Subscription PDF Requires Subscription Visual Abstract

  109-126

• Ultrasonic fatigue testing of AISI 304 and 316 stainless steels under environmental and immersion conditions

  Luis M. Torres Duarte, Gonzalo Mariano Domínguez Almaraz, Hipólito M. Venegas Montaño

  Requires Subscription PDF Requires Subscription Visual Abstract

  175-185

• Effect of Pre-tensioning Force on Behavior of Buckling Restrained Brace (BRB) Supported by Double Pre-tensioning System

  Mohamed Selim, Muhammad E. Kamel, Eman Elshamy, Mohamed Emara

  Requires Subscription PDF Requires Subscription Visual Abstract

  205-216

• Investigations on tool wear behavior in turning AISI 304 stainless steel: An empirical and neural network modeling approach

  Satish Chinchanikar, Mahendra Gadge

  Requires Subscription PDF Requires Subscription Visual Abstract

  176-191

• Characterization of the mechanical properties and microstructural evolution of martensitic steel in repeated tempering cycles

  Amitkumar Shelar, B. P. Ronge

  Requires Subscription PDF Requires Subscription Visual Abstract

  38-55

• High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering

  Paolo Ferro, Alberto Fabrizi, Franco Bonollo, H.S.A. Elsayed, Filippo Berto, Gianpaolo Savio

  Requires Subscription PDF Requires Subscription Visual Abstract

  246-256

• Computer Vision Algorithm for the detection of fracture cracks in Oil Hardening Non-Shrinking (OHNS) die steel after machining process

  Akshansh Mishra, Vijaykumar S Jatti, Nitin K Khedkar, Rahul B. Dhabale, Ashwini V Jatti

  Requires Subscription PDF Requires Subscription Visual Abstract

  234-245

• The Metallurgical hydrogen as an indicator and cause of damage to rolled steel

  Vladimir Polyanskiy, Victor Loginov, Yuriy A. Yakovlev, Anatoly Polyanskiy, Vecheclav Olekov, Gregory Rostovykh

  Requires Subscription PDF Requires Subscription Visual Abstract

  301-308

• Numerical simulation of creep notched bar of P91 steel

  Norhaida Ab Razak, C. M. Davies

  Requires Subscription PDF Requires Subscription Visual Abstract

  261-270

• Effect of composition and heat treatment on the mechanical properties of Fe Mn Al steels

  Avishek Mondal, Daniela Pilone, Andrea Brotzu, Ferdinando Felli

  Requires Subscription PDF Requires Subscription Visual Abstract

  624-633

• Experimental and numerical investigation of gap K-joints of rectangular hollow section trusses

  Faycal Slimani, Mohammed Benzerara, Messaoud Saidani

  Requires Subscription PDF Requires Subscription Visual Abstract

  107-125

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  Requires Subscription PDF Requires Subscription Visual Abstract

  26-53

• Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel

  Nicolás Emanuel Tenaglia, Diego Fernandino, Alejandro Daniel Basso

  Requires Subscription PDF Requires Subscription Visual Abstract

  212-224

• Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially

  Yousria Boulmaali-Hacene Chaouche, Nadia Kouider, Kamel Djeghaba, Bachir Kebaili

  Requires Subscription PDF Requires Subscription Visual Abstract

  91-106

• Al2O3 and TiO2 flux enabling activated tungsten inert gas welding of 304 austenitic stainless steel plates

  Hiralal S. Patil, D. C. Patel

  Requires Subscription PDF Requires Subscription Visual Abstract

  59-68

• Identification of the anisotropic behavior of the laser welded Interstitial Free steel HC260Y subjected to uniaxial tensile tests

  Latifa Arfaoui, Amel Samet, Amna Znaidi

  Requires Subscription PDF Requires Subscription Visual Abstract

  282-293

• Flexural behavior of delta and bi-delta cold-formed steel beams: experimental investigation and numerical analysis

  Yazid Hadidane, Nadia Kouider, Mohammed Benzerara

  Requires Subscription PDF Requires Subscription Visual Abstract

  69-88

• Review of Current Developments on High Strength Pipeline Steels for HIC Inducing Service

  Ehsan Entezari, Jorge Luis González-Velázquez, Diego Rivas López, Manuel Alejandro Beltrán Zúñiga, Jerzy A. Szpunar

  Requires Subscription PDF Requires Subscription Visual Abstract

  20-45

• Elastic surface crack interaction and its engineering critical assessment within the framework of fitness-for-service standards

  Gabriel de Castro Coêlho, Dr. Antonio Almeida Silva, Dr. Marco Antonio dos Santos

  Requires Subscription PDF Requires Subscription Visual Absract

  134-145

• Web post-buckling strength of thin-webbed cellular beams using carbon PFRP profiles

  Hamda Guedaoura, Yazid Hadidane

  Requires Subscription PDF Requires Subscription Visual Abstract

  43-61

• Microstructure and anisotropic tensile performance of 316L stainless steel manufactured by selective laser melting

  Lin Wang

  Requires Subscription PDF Requires Subscription Visual Abstract

  380-391

• Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation

  Daniele Rigon, Filippo Berto, Giovanni Meneghetti

  Requires Subscription PDF Requires Subscription Visual Abstract

  525-536

• Numerical study of TRIP transformation in 35NCD16 steel-effects of plate orientation and some criteria

  Mounir Gaci, Fedaoui Kamel, Lazhar Baroura, Amar Talhi

  Requires Subscription PDF Requires Subscription Visual Abstract

  444-460

• Determining the endurance limit of AISI 4340 steels in terms of different statistical approaches

  Salim Çalışkan, Rıza Gürbüz

  Requires Subscription PDF Requires Subscription Visual Abstract

  344-364

• Influence of 3d-printing parameters on the mechanical properties of 17-4PH stainless steel produced through Selective Laser Melting

  Francesca Romana Andreacola, Ilaria Capasso, Letizia Pilotti, Giuseppe Brando

  Requires Subscription PDF Requires Subscription Visual Abstract

  282-295

• Influence of themo-mechanical treatments and microstructural state on the fatigue behaviour of a weald seam: case of API X60 steel

  Mohammed Achoui , Fethi Sebaa, Benattou Bouchouicha

  Requires Subscription PDF Requires Subscription Visual Abstract

  365-375

• Fully implicit numerical integration of the Yoshida-Uemori two-surface plasticity model with isotropic hardening stagnation

  Riccardo Fincato, Seiichiro Tsutsumi, Alex Zilio, Gianluca Mazzucco, Valentina Salomoni

  Requires Subscription PDF Requires Subscription Visual Abstract

  114-126

• A Simplified ALE model for finite element simulation of ballistic impacts with bullet splash – development and experimental validation

  Riccardo Andreotti, Sergio Abate, Andrea Casaroli, Mauro Quercia, Riccardo Fossati, Marco V. Boniardi

  Requires Subscription PDF Requires Subscription Visual Abstract

  223-245

• The effect of surface texturing in the sliding surface on tribological characteristics of alloy steel under wet condition

  Hiralal S. Patil, D. C. Patel

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-13

• Development of mathematical model and optimization of GMA welding parameters of IS 2062 grade A steel weldments

  Saadat Ali Rizvi, Wajahat Ali

  Requires Subscription PDF Requires Subscription Visual Abstract

  84-93

• Study of the Influence of Alloying Elements on the Mechanical Characteristics and Wear Behavior of a Ductile Cast Iron

  Iliasse Boulifa, Ali Hadji

  Requires Subscription PDF Requires Subscription Visual Abstract

  74-83

• Influence of the applied layer on the state of stress in a bimetallic perforated plate under two load variants

  Mateusz Konieczny, Grzegorz Gasiak, Henryk Achtelik

  Requires Subscription PDF Requires Subscription Visual Abstract

  137-150

• Failure analysis and numerical simulation of slab carrying clamps

  Branislav Đorđević, Simon Sedmak, Drakče Tanasković, Marko Gajin, Filip Vučetić

  Requires Subscription PDF Requires Subscription Visual Abstract

  336-344

• Effect of the intermediate quenching on fracture toughness of ferrite-martensite dual phase steels

  B Sunil, S. Rajanna

  Requires Subscription PDF Requires Subscription Visual Abstract

• Experimental analysis of the state of stress in a steel – titanium perforated plate loaded with concentrated force

  Mateusz Konieczny, Grzegorz Gasiak, Henryk Achtelik

  Requires Subscription PDF Requires Subscription Visual Abstract

  277-288

• Bi-level Hybrid Uncertainty Quantification in Fatigue Analysis: S-N Curve Approach

  Raphael Basilio Pires Nonato

  Requires Subscription PDF Requires Subscription Visual Abstract

  88-103

• Effect of different parameters controlling the flexural behavior of RC beams strengthened with NSM using nonlinear finite element analysis

  Ramy Mostafa Reda, Zeinab Omar, Hossam Sallam, Seleem S. E. Ahmad

  Requires Subscription PDF Requires Subscription Visual Abstract

  106-123

• Unified methodology for characterisation of global fatigue damage evolution in adhesively bonded joints

  Jaiswal Pankaj, Rahul Iyer Kumar, Wim De Waele

  Requires Subscription PDF Requires Subscription Visual Abstract

  26-37

• Initiation of hydrogen induced cracks at secondary phase particles

  Aurélie Laureys, Margot Pinson, Lisa Claeys, Tim Deseranno, Tom Depover, Kim Verbeken

  Requires Subscription PDF Requires Subscription Visual Abstract

  113-127

• Numerical modelling of dynamic ductile fracture propagation in different lab-scale experiments using GTN damage model

  Benoît Paermentier, Dimitri Debruyne, Reza Talemi

  Requires Subscription PDF Requires Subscription Visual Abstract

  105-112

• Numerical Analysis and Verification of Residual Stress in T Joint of S355 Steel

  Xiangming Wang, Erfu Guo

  Requires Subscription PDF Requires Subscription Visual Abstract

  25-32

• Study on the thermal cycle of Wire Arc Additive Manufactured (WAAM) carbon steel wall using numerical simulation

  Mohsen Saadatmand, Reza Talemi

  Requires Subscription PDF Requires Subscription Visual Abstract

  98-104

• Differential Evolution Algorithm for Identification of Structural Damage in Steel Beams

  Brunno Emidio Sobrinho, Gilberto Gomes, Welington Vital da Silva, Ramon Silva, Erwin U. L. Palechor, Luciano M. Bezerra

  Requires Subscription PDF Requires Subscription Visual Abstract

  51-66

• Finite Element Modeling of the Behavior of a Hollow Cylinder in a Hydrogen-Containing Environment

  Assia Amina Lakhdari, Serguey A. Bubnov, Aissa Seddak, Ilya I. Ovchinnikov, Igor G. Ovchinnikov

  Requires Subscription PDF Requires Subscription Visual Abstract

  236-253

• The hydrogen embrittlement sensitivity of duplex stainless steel with different phase fractions evaluated by in-situ mechanical testing

  Margo Cauwels, Lisa Claeys, Tom Depover, Kim Verbeken

  Requires Subscription PDF Requires Subscription Visual Abstract

  449-458

• Three approaches to evaluate of the heat dissipated during fatigue crack propagation experiments

  Alena Vedernikova, Anastasiia Iziumova, Aleksey Vshivkov, Oleg Plekhov

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-8

• Comparison of the mechanical response of B400c and B450c dual phase steel bar categories, in long terms

  Charis Apostolopoulos, Argyro Drakakaki, Alkiviadis Apostolopoulos, Konstantinos Koulouris

  Requires Subscription PDF Requires Subscription Visual Abstract

  548-559

• Corrosion’s impact on wire rope strand response – Comparison with a theoretical predictive model

  Amal TIJANI, Meryam Meknassi, Hassan Chaffoui, Mohamed El Ghorba

  Requires Subscription PDF Requires Subscription Visual Abstract

  141-148