Fracture under Mixed-Mode and Multiaxial Loading

182 Items

All Items

Cracking directions in multiaxial low cycle fatigue at high and room temperatures

Masao Sakane, Takamoto Itoh

Subscription Access PDF
Pages 16-23
Determination of the critical plane orientation depending on the fatigue curves for bending and torsion

Marta Kurek, Tadeusz ?agoda

Subscription Access PDF
Pages 24-30
Effect of spectral cross-correlation on multiaxial fatigue damage: simulations using the critical plane approach

Andrea Carpinteri, Andrea Spagnoli, Sabrina Vantadori

Subscription Access PDF
Pages 40-44
Evaluation and visualization of multiaxial fatigue behavior under random non-proportional loading condition

Takahiro Morishita, Fumio Ogawa, Takamoto Itoh

Subscription Access PDF
Pages 45-53
Evaluation of new multiaxial damage parameters on low carbon steel

A. S. Cruces, P. Lopez-Crespo, B. Moreno, A. Lopez-Moreno, S. Suman

Subscription Access PDF
Pages 54-61
Influence of crack micro-roughness on the plasticity-induced fatigue propagation in high strength steel

J. Toribio, J.C. Matos, B. González

Subscription Access PDF
PAges 62-65
Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue

Andrea Carpinteri, Giovanni Fortese, Camilla Ronchei, Daniela Scorza, Sabrina Vantadori, Filippo Berto

Subscription Access PDF
Pages 66-70
Multiaxial fatigue property of type 316 stainless steel using hollow cylinder specimen under combined pull loading and inner pressure

Takahiro Morishita, Yuta Takada, Takamoto Itoh

Subscription Access PDF
Pages 71-78
Multiaxial fatigue strength of titanium alloys

Filippo Berto, Alberto Campagnolo, Torgeir Welo, Andrea Carpinteri

Subscription Access PDF
Pages 79-89
Notched multiaxial fatigue of Al7050-T7451: on the need for an equivalent process zone size

M.V.C Sá, J.L.A Ferreira, C.R.M da Silva, J.A. Araújo

Subscription Access PDF
Pages 90-97
On the applicability of Miner’s rule for multiaxial fatigue life calculations under non-proportional load histories

Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Samuel Elias Ferreira, Hao Wu

Subscription Access PDF
Pages 98-105
Prediction of fatigue crack initiation under biaxial loading

J.V. Sahadi, D. Nowell, R.J.H. Paynter

Subscription Access PDF
Pages 106-113
Sharp three-dimensional notches under combined nominal normal and shear fatigue loading

M. Vormwald, E. Shams

Subscription Access PDF
Pages 114-122
Simple criterion for predicting fatigue life under combined bending and torsion loading

K. Slámecka, J. Pokluda

Subscription Access PDF
Pages 123-128
On the connection between mode II and mode III effective thresholds in metals

Tomas Vojtek, Stanislav Zak, Jaroslav Pokluda

Subscription Access PDF
Pages 245-251
The effect of creep damage formulation on crack tip fields, creep stress intensity factor and crack growth assessments

V. Shlyannikov, A. Tumanov

Subscription Access PDF
Pages 285-292
Variable mode-mixity during fatigue cycles – crack tip parameters determined from displacement fields measured by digital image correlation

Michael Vormwald, Yigiter Hos, José L.F. Freire, Giancarlo L.G. Gonzáles, Jorge G. Díaz

Subscription Access PDF
Pages 314-322
Inverse identification of the material parameters of a nonlinear concrete constitutive model based on the triaxial compression strength testing

Petr Král, Petr Hradil, Ji?í Kala

Subscription Access PDF
Pages 38-46
A probabilistic approach for multiaxial fatigue criteria

M. Muñiz Calvente, S. Blasón, A. Fernández Canteli, A. de Jesús, J. Correia

Subscription Access PDF
Pages 160-165
A study of white etching crack formation by compression-torsion experiments

S. Averbeck, E. Kerscher

Subscription Access PDF
Pages 12-18
Multiaxial fatigue assessment of crankshafts by local stress and critical plane approach

M. Leitner, F. Grun, Z. Tuncali, R. Steiner, W. Chen

Subscription Access PDF
Pages 47-53
Incorporation of Mean/Maximum Stress Effects in the Multiaxial Racetrack Filter

Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Hao Wu

Subscription Access PDF
Pages 67-75
Effect of molding processes on multiaxial fatigue strength in short fibre reinforced polymer

Takahiko Sawada, Hiroshi Aoyama

Subscription Access PDF
Pages 92-98
Application of the Moment Of Inertia method to the Critical-Plane Approach

Hao Wu, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro

Subscription Access PDF
Pages 99-105
Systematic validation of experimental data usable for verifying the multiaxial fatigue prediction methods

J. Papuga, S. Parma, M. Ruzicka

Subscription Access PDF
Pages 106-113
Fatigue of weld ends under combined in- and out-of-phase multiaxial loading

E. Shams, M. Vormwald

Subscription Access PDF
Pages 114-120
Comparison between SSF and Critical-Plane models to predict fatigue lives under multiaxial proportional load histories

Manuel de Freitas, Luis Reis, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro

Subscription Access PDF
Pages 121-127
A unified rule to estimate multiaxial elastoplastic notch stresses and strains under in-phase proportional loadings

Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Luiz Fernando Martha, Luiz Fernando Nazaré Marques

Subscription Access PDF
Pages 128-134
Theorical study on mechanical properties of AZ31B Magnesium alloy Sheets under multiaxial loading

A. Znaidi, O. Daghfas, S. Guellouz, R. Nasri

Subscription Access PDF
Pages 135-140
Fatigue crack growth of aluminium alloy 7075-T651 under non-proportional mixed mode I and II loads

Xiaobo Yu, Ling Li, Gwenaelle Proust

Subscription Access PDF
Pages 148-154
Fatigue life assessment of thin-walled welded joints under non-proportional load-time histories by the shear stress rate integral approach

A. Bolchoun, C. M. Sonsino, H. Kaufmann, T. Melz

Subscription Access PDF
Pages 162-169
Equi-biaxial loading effect on austenitic stainless steel fatigue life

C. Gourdin, S. Bradaï, S. Courtin, J.C. Le Roux, C. Gardin

Subscription Access PDF
Pages 170-176
A critical analysis of the Mises stress criterion used in frequency domain fatigue life prediction

Adam Nieslony

Subscription Access PDF
Pages 177-183
Implementation of fatigue model for unidirectional laminate based on finite element analysis: theory and practice

D. Carrella-Payan, B. Magneville, M. Hack, C. Lequesne, T. Naito, Y. Urushiyama, W. Yamazaki, T. Yokozeki, W. Van Paepegem

Subscription Access PDF
Pages 184-190
Atomistic modeling of different loading paths in single crystal copper and aluminum

R. Pezer, I. Trapic

Subscription Access PDF
Pages 191-197
Averaged strain energy density-based synthesis of crack initiation life in notched steel bars under torsional fatigue

Filippo Berto, Alberto Campagnolo, Giovanni Meneghetti, Keisuke Tanaka

Subscription Access PDF
Pages 215-223
Development of a multiaxial fatigue damage parameter and life prediction methodology for non-proportional loading

Sandip Suman, Alan Kallmeyer, John Smith

Subscription Access PDF
Pages 224-230
Numerical modelling of ductile damage mechanics coupled with an unconventional plasticity model

R. Fincato, S. Tsutsumi

Subscription Access PDF
Pages 231-236
A comparison of methods for calculating notch tip strains and stresses under multiaxial loading

M. Lutovinov, J. ?erný, J. Papuga

Subscription Access PDF
Pages 237-243
Fatigue life assessment of a non-load carrying fillet joint considering the effects of a cyclic plasticity and weld bead shape

S. Tsutsumi, K. Morita, R. Fincato, H. Momii

Subscription Access PDF
Pages 240-250
Tensile and fatigue behaviour of as-forged AZ31B extrusion

A. Gryguc, S.K. Shaha, H. Jahed, M. Wells, B. Williams, J. McKinley

Subscription Access PDF
Pages 251-258
Random non-proportional fatigue tests with planar tri-axial fatigue testing machine

T. Inoue, R. Nagao, N. Takeda

Subscription Access PDF
Pages 259.265
Ductile fracture modelling and J-Q fracture mechanics: a constraint based fracture assessment approach

N.O. Larrosa, R.A. Ainsworth

Subscription Access PDF
Pages 266-272
Pressure vessels design methods using the codes, fracture mechanics and multiaxial fatigue

Fatima Majid, Jilali Nattaj, Mohamed Elghorba

Subscription Access PDF
Pages 273-280
Creep-fatigue life evaluation of high chromium ferritic steel under non-proportional loading

T. Morishita, Y. Murakami, T. Itoh, H. Tanigawa

Subscription Access PDF
Pages 281-288
Fatigue strength of SS400 steel under non-proportional loading

T. Morishita, T. Takaoka, T. Itoh

Subscription Access PDF
Pages 289-295
The effect of varying loading directions and loading levels on crack growth at 2D- and 3D-mixed-mode-loadings

A. Eberlein, H.A. Richard

Subscription Access PDF
Pages 351-358
Crack front segmentation under combined mode I- and mode IIIloading

A. Eberlein, H. A. Richard

Subscription Access PDF
1-7
Plastic flow equations for the local strain approach in the multiaxial case

C. Madrigal, A. Navarro, C. Vallellano

Subscription Access PDF
8-14
Multiaxial fatigue of in-service aluminium longerons for helicopter rotor-blades

A. Shanyavskiy, A. Toushentsov

Subscription Access PDF
22-27

Previous 51-100 of 182 Next