Marta Kurek Tadeusz ?agoda


This paper contains a proposition setting out a new way of determining an orientation angle of the critical plane. The applied method involves an analysis of fatigue life results’ scatter of several selected materials on the basis of a new criterion of multiaxial fatigue. The expression for the equivalent stress was derived on the basis of pure bending and pure torsion. The paper also contains a verification of the effectiveness of the proposed model by analyzing scatter bands and the value of the ratio of normal to shear stresses.


  1. Latest Oldest Top Comments


    Download data is not yet available.



    How to Cite

    Kurek, M. and ?agoda, T. (2017) “Determination of the critical plane orientation depending on the fatigue curves for bending and torsion”, Frattura ed Integrità Strutturale, 11(41), pp. Pages 24–30. doi: 10.3221/IGF-ESIS.41.04.