Assessment of mechanical, fracture and thermal properties of epoxy nanocomposites reinforced with low-concentration nano Boron Carbide (B4C)
##plugins.themes.bootstrap3.article.sidebar##
##plugins.themes.bootstrap3.article.main##
https://orcid.org/0000-0001-7696-6037
N.R. Banapurmath
Centre of Excellence in Material Science, School of Mechanical Engineering, KLE Technological University, Hubballi-580031, India. School of Mechanical Engineering, KLE Technological University, Hubballi-580031, India.
https://orcid.org/0000-0002-1280-6234
M.A. Umarfarooq
Center for Material Science, Karpagam Academy of Higher Education, Coimbatore, Tamil Nadu 641 021, India. Department of Mechanical Engineering Karpagam Academy of Higher Education, Coimbatore, Tamil Nadu 641 021, India.
https://orcid.org/0000-0002-9369-7913
Adavayya Chikkamath
School of Mechanical Engineering, KLE Technological University, Hubballi, India
https://orcid.org/0009-0007-4387-3337
Ashok M. Sajjan
Centre of Excellence in Material Science, School of Mechanical Engineering, KLE Technological University, Hubballi-580031, India.
https://orcid.org/0000-0003-1251-8803
K. Rajesh
Department of Robotics and Automation, Symbiosis Institute of Technology, Symbiosis International (Deemed University), Lavale, Pune-412115, Maharashtra, India,
Ramesh M. Kenchappanavar
https://orcid.org/0009-0002-4383-9650
Kartheek Ravulapati
Collins Aerospace, 5935, Pinnacle View Road, Cumming GA 30040, United States
Abstract
This study investigates the effects of low concentration (0.1-0.4 wt.%) nano-boron carbide (B4C) reinforcement on the mechanical, thermal and fracture properties of epoxy nanocomposites. The nanocomposites were prepared via solution casting using ultrasonication to ensure proper dispersion of the nanofiller. The characterisation included Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), tensile, flexural, impact and fracture tests. Results showed significant enhancements in mechanical properties. Tensile strength peaked at 31.2 MPa (71% improvement) for 0.3 wt. % B4C, while modulus increased steadily to 1400 MPa (33% improvement). Flexural tests showed a progressive enhancement in bending strength, exhibiting 70.46 MPa (50% improvement) at 0.4 wt. % B4C. Impact strength surged by 62% at 0.4 wt. % and fracture toughness increased steadily, exhibiting 70% improvement. Thermal analysis revealed a higher glass transition temperature (Tg) and improved stability with B4C addition, attributed to restricted polymer chain mobility. SEM images showed improved fracture resistance, with rougher surfaces and smaller cleavage planes indicating effective energy absorption. Finite element (FE) simulations validated experimental tensile and flexural results, with variations within 15%. Statistical analysis confirmed all improvements were significant (p < 0.05).
##plugins.themes.bootstrap3.article.details##
How to Cite
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.