Alloys: Al alloys

All Items

• The Effect of corrosion on the quality repair of the aluminum alloy A 5083 H11 by bonded composites

  Sadek Kaddour, Benaoumeur Aour, Mohammed Salah Bennouna, Abderrahim Talha, Belabbes Bachir Bouiadjra, Morad fari bouanani

  Requires Subscription PDF Requires Subscription Visual Abstract

  51-65

• A new approach of CMT seam welding deformation forecasting based on GA-BPNN

  Yao Lu, Yanfeng Xing, Xuexing Li, Sha Xu

  Requires Subscription PDF Requires Subscription Visual Abstract

  325-336

• Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints

  Paulo NB Reis, Ana Amaro, Altino Loureiro

  Requires Subscription PDF Requires Subscription Visual Abstract

  124-133

• Fatigue Life Simulation and Analysis of Aluminum Alloy Sheet Self-piercing Riveting

  Qingchun Zheng, Naixin Wang, Peihao Zhu, Jingna Liu, Wenpeng Ma

  Requires Subscription PDF Requires Subscription Visual Abstract

  141-151

• Uniformity of thickness of metal sheets by patchwork blanks: potential of adhesive bonding

  Gianluca Parodo, Gillo Giuliano, Luca Sorrentino

  Requires Subscription PDF Requires Subscription Visual Abstract

  166-176

• Elastoplastic analysis of cracked Aluminum plates with a hybrid repair technique using the bonded composite patch and drilling hole in opening mode I

  Wahiba Nessrine Bouzitouna, Wahid Oudad, Mohamed Belhamiani, Djamel Eddine Belhadri, Leila Zouambi

  Requires Subscription PDF Requires Subscription Visual Abstract

  256-268

• Simulation of the delay effect after applying a simple overload on alloys of aluminum 2024T351 using the Willemborg model

  Kaddour Bahram, Mohamed Chaib, Abdelkader Slimene, Benattou Bouchouicha

  Requires Subscription PDF Requires Subscription Visual Abstract

  467-476

• Influence of static mean stresses on the fatigue behavior of 2024 aluminum alloy under multiaxial loading

  Andrey Yankin, Valerii Wildemann, Nikolai Belonogov, Oleg Staroverov

  Requires Subscription PDF Requires Subscription Visual Abstract

  151-163

• Experimental investigation of fatigue crack initiation from notch for 2024 T351 Al-alloy

  Mustapha Benachour, Nadjia Benachour, Mohamed Benguediab

  Requires Subscription PDF Requires Subscription Visual Abstract

  45-51

• A SEM-X-Ray assisted experimental approach for the determination of mechanical and thermal load – induced damage in MMCs

  Victor Kytopoulos, Emilios Sideridis, John Venetis, Chrysoula Riga, Alexandros Altzoumailis

  Requires Subscription PDF Requires Subscription Visual Abstract

  414-422

• Metal foaming by powder metallurgy process: investigation of different parameters on the foaming efficiency

  Ioannis Papantoniou, Helena Kyriakopoulou, Dimitrios Pantelis, Dimitrios Manolakos

  Requires Subscription PDF Requires Subscription Visual Abstract

  497-504

• Simulation of the corrosion-induced damage on aluminum alloy 2024 specimens with equivalent surface notches

  Nikolaos Alexopoulos, Nikoleta Siskou, Christina-Margarita Charalampidou, Stavros Kourkoulis

  Requires Subscription PDF Requires Subscription Visual Abstract

  342-353

• Crack growth study under thermo-mechanical loads: parametric analysis for 2024 T3 aluminum alloy

  Salmi abdallah, Mohamed Elajrami, Mohamed El-Amine Slimani

  Requires Subscription PDF Requires Subscription Visual Abstract

  231-241

• Using XFEM Techniques to Predict the Damage of aluminum 2024T3 notched under tensile load

  Abdallah Benzaama, Mohamed Mokhtari, Habib Benzaama, Elamine Abdelouahed, Tawfik Tamine, Kouider Madani, Amir Slamen, Mrabet Ilies

  Requires Subscription PDF Requires Subscription Visual Abstract

  184-193

• Modeling of a cracked and repaired Al 2024T3 aircraft plate: effect of the composite patch shape on the repair performance

  Mohammed Baghdadi, Boualem Serier, Mokadem Salem, Bouchra Zaoui, Khacem Kaddouri

  Requires Subscription PDF Requires Subscription Visual Abstract

  68-85

• Effect of yield stress on fatigue crack growth

  Fernando Ventura Antunes, Micael Frias Borges, Pedro Prates, Ricardo Branco, Marta Oliveira

  Requires Subscription PDF Requires Subscription Visual Abstract

  9-19

• A 3D analysis of crack-front shape of asymmetric repaired aluminum panels with composite patches

  Abdelkader Djebli, El Hadj Besseghier, Mostefa Bendouba, Abdelghani Baltach, Abdelkrim Aid

  Requires Subscription PDF Requires Subscription Visual Abstract

  547-556

• Analysis of the Fatigue Damage Behavior of AW2099-T83 Al-Li Alloy under Strain-Controlled Fatigue

  Muhammed Jamiu Adinoyi, Nesar Merah, Prof., Jafar Albinmousa, Associate Prof

  Requires Subscription PDF Requires Subscription Visual Abstract

  487-506

• Damage evolution in the AlMg6 alloy during high and very high cycle fatigue

  Mikhail Bannikov, Dmitry Bilalov, Vladimir Oborin, Oleg Naimark

  Requires Subscription PDF Requires Subscription Visual Abstract

  383-395

• Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS

  Annalisa Pola, Davide Battini, Marialaura Tocci, Andrea Avanzini, Luca Girelli, Candida Petrogalli, Marcello Gelfi

  Requires Subscription PDF Requires Subscription Visual Abstract

  775-790

• Friction influence on the AA6060 aluminium alloy formability

  Costanzo Bellini, Gillo Giuliano, Luca Sorrentino

  Requires Subscription PDF Requires Subscription Visual Abstract

  791-799

• Verification of the ΔKeff hypothesis along the fatigue crack path in thin and thick Al specimens

  Julián Andrés Ortiz González, Jaime Tupiassú Pinho de Castro, Giancarlo Luis Gomez Gonzáles, Marco Antonio Meggiolaro, José Luiz de França Freire

  Requires Subscription PDF Requires Subscription Visual Abstract

  26-35

• Determination of Stress Intensity Factors and J integral based on Digital Image Correlation

  Eric Breitbarth, Tobias Strohmann, Michael Besel, Stefan Reh

  Requires Subscription PDF Requires Subscription Visual Abstract

  12-25

• Determination of dissipated Energy in Fatigue Crack Propagation Experiments with Lock-In Thermography

  Jürgen Bär, Ralf Urbanek

  Requires Subscription PDF Requires Subscription Visual Abstract

  563-570

• Fatigue strength evaluation and fracture behavior of joined dual phase steel/AA6061-T6 aluminum alloy

  Ruben Perez Mora, Celso Eduardo Cruz Gonzalez, Saul Daniel Santillan Gutierrez, Jose Jaime Taha Tijerina, Benjamin Vargas Arista, Arturo Barba Pingarron

  Requires Subscription PDF Requires Subscription Visual Abstract

  530-544

• Development of hybrid friction stir welding and adhesive bonding single lap joints in aluminium alloys

  Ricardo Leite Maciel, Virginia Infante, Daniel Braga, Pedro Moreira, Tiago Bento, Lucas da Silva

  Requires Subscription PDF Requires Subscription Visual Abstract

  269-285

• Prediction and optimizing residual stress profile induced by cold expansion in aluminum alloys using experimental design

  Abdelkader Miloudi, M. Laredj, A. Lousdad, B. Benguediab

  Requires Subscription PDF Requires Subscription Visual Abstract

  193-207

• Cruciform specimens used for determination of the influence of T-stress on fatigue crack growth with overloads on aluminum alloy Al 6061 T651

  Sebastian Henkel, Carl H. Wolf, Horst Biermann, Andreas Burgold, Meinhard Kuna

  Requires Subscription PDF Requires Subscription Visual Abstract

  135-143

• Influence of secondary dendrite arm spacing (SDAS) on the fatigue properties of different conventional automotive aluminum cast alloys

  Sascha Gerbe, Ulrich Krupp, Wilhelm Michels

  Requires Subscription PDF Requires Subscription Visual Abstract

  105-115

• The effect of low-cycle fatigue on evolution of fracture mechanics parameters in residual stress field caused by cold hole expansion

  Yury Matvienko, Vladimir Pisarev, Svyatoslav Eleonsky

  Requires Subscription PDF Requires Subscription Visual Abstract

  303-320

• Influence of the Coupling between the Mechanical Characteristics and the Welding Conditions by the FSSW Process: Case of the Bimaterial Alu-Steel

  Benattou Bouchouicha, H. Mekri, A. Miloudi, H. Christophe, A. Imad

  Requires Subscription PDF Requires Subscription Visual Abstract

  62-72

• Effect of cold expansion on improving of fatigue initiation life in Aluminium alloy

  Mohamed El Habiri, Mustapha Benachour, Nadjia Benachour

  Requires Subscription PDF Requires Subscription Visual Abstract

  34-44

• Simulation of the behavior of aluminum alloys welded in Friction Stir Welding FSW

  Bounini Bousekrine Taha, Bouchouicha Benattou, Abdelkader Ghazi

  Requires Subscription PDF Requires Subscription Visual Abstract

  1-13

• Multiaxial fatigue of in-service aluminium longerons for helicopter rotor-blades

  A. Shanyavskiy, A. Toushentsov

  Requires Subscription PDF

  Pages 399-404

• S-N curve modeling method of Aluminum alloy welded joints based on the fatigue characteristics domain

  Li Zou, Xinhua Yang, Jianrong Tan, Yibo Sun

  Requires Subscription PDF

  Pages 137-148

• Forming Process Analysis of an AA6060 Aluminum Vessel

  Gillo Giuliano, Costanzo Bellini, Luca Sorrentino, Sandro Turchetta

  Requires Subscription PDF Requires Subscription Visual Abstract

  164-172

• Fatigue life prediction of 5083 and 5A06 aluminum alloy T-welded joints based on the fatigue characteristics domain

  li zou, Xinhua Yang, Jianrong Tan, Hongji Xu, Yibo Sun

  Requires Subscription PDF Requires Subscription Visual Abstract

  43-66

• Development of an optimal process for friction stir welding based on GA-RSM hybrid algorithm

  Nabi Mehri Khansari, Filippo Berto, Namdar Karimi, S.M.N Ghoreishi, Mahdi Fakoor, Mozhgan Mokari

  Requires Subscription PDF

  106-122

• Numerical simulation of self-piercing riveting process (SRP) using continuum damage mechanics modelling

  Nicola Bonora, Gabriel Testa, Gianluca Iannitti, Andrew Ruggiero, Domenico Gentile

  Requires Subscription PDF Requires Subscription Video1 Requires Subscription Video2 Requires Subscription Video3 Requires Subscription Video4

  161-172

• Modification of the Bonora Damage Model for shear failure

  Nicola Bonora, Gabriel Testa, Andrew Ruggiero, Gianluca Iannitti, Domenico Gentile

  Requires Subscription PDF

  140-150

• Evaluation of cavitation erosion resistance of Al-Si casting alloys: effect of eutectic and intermetallic phases

  Marialaura Tocci, Annalisa Pola, Lorenzo Montesano, G. Marina La Vecchia

  Requires Subscription PDF

  Pages 218-230

• Fatigue crack growth of composite patch repaired Al-alloy plates under variable amplitude loading

  Fatima Zohra Seriari, Mustapha Benachour, Mohamed Benguediab

  Requires Subscription PDF

  Pages 43-56

• Fatigue crack growth in 2017A-T4 alloy subjected to proportional bending with torsion

  D. Rozumek, S. Faszynka

  Requires Subscription PDF

  Pages 23-29

• Investigation on some factors affecting crack formation in high resistance aluminum alloys

  A. Brotzu, F. Felli, D. Pilone

  Requires Subscription PDF

  Pages 272-279

• Investigation of mechanical properties of AlSi3Cr alloy

  Marialaura Tocci, Annalisa Pola, Lorenzo Montesano, G. Marina La Vecchia, Mattia Merlin, Gian Luca Garagnani

  Requires Subscription PDF

  Pages 337-351

• Effect of different environmental conditions on surface crack growth in aluminum alloys

  V. Shlyannikov, R. Yarullin, I. Ishtyryakov

  Requires Subscription PDF

  Pages 31-39

• Notched multiaxial fatigue of Al7050-T7451: on the need for an equivalent process zone size

  M.V.C Sá, J.L.A Ferreira, C.R.M da Silva, J.A. Araújo

  Requires Subscription PDF

  Pages 90-97

• Williams expansion-based approximation of the stress field in an Al 2024 body with a crack from optical measurements

  S. Seitl, L. Malíkova, J. Sobek, P. Frantík, P. Lopez-Crespo

  Requires Subscription PDF

  Pages 323-331

• Experimental and numerical study on mechanical properties of aluminum alloy under uniaxial tensile test

  O. Daghfas, A. Znaidi, A. Ben Mohamed, R. Nasri

  Requires Subscription PDF

  Pages 263-273

• Atomistic modeling of different loading paths in single crystal copper and aluminum

  R. Pezer, I. Trapic

  Requires Subscription PDF

  Pages 191-197