Linear and Nonlinear Fracture Mechanics

All Items

• Pilot evaluation of a fracture process zone in a modified compact tension specimen by X-ray tomography

  Jiri Klon, Stanislav Seitl, Hana Simonova, Zbynek Kersner, Ivana Kumpova, Daniel Vavrik

  Requires Subscription PDF

  Pages 161-169

• Over-deterministic method: The influence of rounding numbers on the accuracy of the values of Williams’ expansion terms

  Vladimir Ruzicka, Lucie Malikova, Stanislav Seitl

  Requires Subscription PDF

  Pages 128-135

• Generalised fracture mechanics approach to the interfacial failure analysis of a bonded steel-concrete joint

  Wouter De Corte, Peter Helincks, Veerle Boel, Jan Klusak, Stanislav Seitl, Geert De Schutter

  Requires Subscription PDF

  Pages 147-160

• Crack onset assessment near the sharp material inclusion tip by means of modified maximum tangential stress criterion

  Ondrej Krepl, Jan Klusák

  Requires Subscription PDF

  Pages 66-73

• Numerical analysis of the influence of liquid on propagation of a rolling contact fatigue crack

  Miroslaw Olzak, Janusz Piechna, Pawel Pyrzanowski

  Requires Subscription PDF

  Pages 46-55

• Comparison of fracture toughness values of normal and high strength concrete determined by three point bend and modified disk-shaped compact tension specimens

  Stanislav Seitl, José D. Ríos, Hector Cifuentes

  Requires Subscription PDF

  Pages 56-65

• Study of strain localizations in a polycrystalline medium in presence of a quasi-static crack

  L. Patriarca, P.G. Luccarelli, S. Foletti

  Requires Subscription PDF

  Pages 277-284

• Crack tip strain evolution and crack closure during overload of a growing fatigue crack

  De-Qiang Wang, Ming-Liang Zhu, Fu-Zhen Xuan

  Requires Subscription PDF

  Pages 143-148

• Fracture toughness of rough and frictional cracks emanating from a re-entrant corner

  Andrea Carpinteri, Andrea Spagnoli, Michele Terzano, Sabrina Vantadori

  Requires Subscription PDF

  Pages 175-182

• Effect of numerical parameters on plastic CTOD

  F.V. Antunes, R. Simoes, R. Branco, P. Prates

  Requires Subscription PDF

  Pages 149-156

• Four-point bending test on a middle strength rock: numerical and experimental investigations

  Aria Mardalizad, Riccardo Scazzosi, Andrea Manes, Marco Giglio

  Requires Subscription PDF

  Pages 504-523

• On the use of length scale parameters to assess the static strength of notched 3D-printed PLA

  Adnan A. Ahmed, Luca Susmel

  Requires Subscription PDF

  Pages 252-259

• The effect of residual stress on the nonsingular T-stresses

  A.S. Chernyatin, Yu.G. Matvienko, I.A. Razumovsky

  Requires Subscription PDF

  Pages 293-298

• Fracture toughness investigations of Al6061-Graphite particulate composite using compact specimens

  Saleemsab Doddamani, Mohamed Kaleemulla

  Requires Subscription PDF

  Pages 484-490

• Parametric study of the deformation of transversely isotropic discs under diametral compression

  Christos F. Markides, Stavros K. Kourkoulis

  Requires Subscription PDF

  Pages 396-411

• Review of the Influence of non-singular higher order terms on the stress field of thin welded lap joints and small inclined cracks in plates

  F. Berto, M.R. Ayatollahi, S. Vantadori, A. Carpinteri

  Requires Subscription PDF

  Pages 260-268

• Crack tip field in circumferentially-cracked round bar (CCRB) in tension affected by loss of axial symmetry

  J. Toribio, B. González, J.C. Matos

  Requires Subscription PDF

  Pages 139-142

• Analysis of longitudinal cracked two-dimensional functionally graded beams exhibiting material non-linearity

  Victor Rizov

  Requires Subscription PDF

  Pages 491-503

• Fatigue assessment of steel rollers by means of the local energy

  F. Chebat, M. Cincera, S.M.J. Razavi, F. Berto, T. Welo

  Requires Subscription PDF

  Pages 447-455

• Stress Intensity Factor calculation from displacement fields

  S. Beretta, L. Patriarca, S. Rabbolini

  Requires Subscription PDF

  Pages 269-276

• Notched graphite under multiaxial loading

  S.M.J. Razavi, M. Peron, J. Torgersen, F. Berto

  Requires Subscription PDF

  Pages 424-431

• 40CrMoV13.9 notched specimens under multiaxial fatigue: an overview of recent results

  S.M.J. Razavi, M. Peron, J. Torgersen, F. Berto, T. Welo

  Requires Subscription PDF

  Pages 440-446

• Experimental methodology for the quantification of crack tip plastic zone and shape from the analysis of displacement fields

  J.M. Vasco-Olmo, F.A. Diaz, M.N. James, C.J. Christopher, E.A. Patterson

  Requires Subscription PDF

  Pages 166-174

• The heat energy dissipated in a control volume to correlate the crack propagation rate in stainless steel specimens

  G. Meneghetti, M. Ricotta

  Requires Subscription PDF

  Pages 299-306

• The influence of crack tip shielding on fatigue crack propagation

  Anghel Cernescu

  Requires Subscription PDF

  Pages 307-313