##plugins.themes.bootstrap3.article.main##

Andrea Carpinteri Giovanni Fortese Camilla Ronchei Daniela Scorza Sabrina Vantadori Filippo Berto

Abstract

In the present paper, the multiaxial fatigue life assessment of notched structural components is performed by employing a strain-based multiaxial fatigue criterion. Such a criterion, depending on the critical plane concept, is extended by implementing the control volume concept reated to the Strain Energy Density (SED) approach: a material point located at a certain distance from the notch tip is assumed to be the verification point where to perform the above assessment. Such a distance, measured along the notch bisector, is a function of both the biaxiality ratio (defined as the ratio between the applied shear stress amplitude and the normal stress amplitude) and the control volume radii under Mode I and Mode III. Once the position of the verification point is determined, the fatigue lifetime is assessed through an equivalent strain amplitude, acting on the critical plane, together with a unique material reference curve (i.e. the Manson-Coffin curve). Some uniaxial and multiaxial fatigue data related to V-notched round bars made of titanium grade 5 alloy (Ti-6Al-4V) are examined to validate the present criterion.

Comments

  1. Latest Oldest Top Comments

    Downloads

    Download data is not yet available.

    ##plugins.themes.bootstrap3.article.details##

    Section
    Miscellanea

    How to Cite

    Carpinteri, A., Fortese, G., Ronchei, C., Scorza, D., Vantadori, S., & Berto, F. (2017). Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue. Frattura Ed Integrità Strutturale, 11(41), Pages 66–70. https://doi.org/10.3221/IGF-ESIS.41.10

    Most read articles by the same author(s)

    << < 1 2 3 4 5 > >>