##plugins.themes.bootstrap3.article.main##

Francesco Iacoviello Vittorio Di Cocco

Abstract

Focusing on ferritic-pearlitic DCIs, these alloys are characterized by a microstructure that ranges
from a fully ferritic to a completely pearlitic matrix, and they are widely used for many applications (e.g. wheels,
gears, crankshafts in cars, exhaust manifolds, valves, flywheels, boxes bearings, hubs, shafts, valves, flanges,
pipelines ...). Considering the graphite elements, their morphology can be considered as degenerated when its
nodularity is too low and this can be due to different causes (e.g., a partially failed nodularization process or a
wrong inoculant). In this work, a ferritic DCI with degenerated nodules was obtained by means of an annealing
treatment and the fatigue crack propagation resistance was investigated by means of fatigue crack propagation
tests performed according to ASTM E647, focusing on the influence of degenerated graphite nodules on the
fatigue crack paths. This analysis was performed both analysing the crack path profile by means of a scanning
electron microscope (SEM) and by means of a SEM fracture surfaces analysis.

Comments

  1. Latest Oldest Top Comments

    Downloads

    Download data is not yet available.

    ##plugins.themes.bootstrap3.article.details##

    Section
    Miscellanea

    How to Cite

    Iacoviello, F., & Di Cocco, V. (2015). Degenerated graphite nodules influence on fatigue crack paths in a ferritic ductile cast iron. Frattura Ed Integrità Strutturale, 9(34). https://doi.org/10.3221/IGF-ESIS.34.45