Fatigue & Fatigue crack growth

All Items

• On short cracks that depart from elastoplastic notch tips

  Verônica Miquelin Machado, Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro

  Requires Subscription PDF

  Pages 236-244

• On the connection between mode II and mode III effective thresholds in metals

  Tomas Vojtek, Stanislav Zak, Jaroslav Pokluda

  Requires Subscription PDF

  Pages 245-251

• The effect of residual stress on the nonsingular T-stresses

  A.S. Chernyatin, Yu.G. Matvienko, I.A. Razumovsky

  Requires Subscription PDF

  Pages 293-298

• The heat energy dissipated in a control volume to correlate the crack propagation rate in stainless steel specimens

  G. Meneghetti, M. Ricotta

  Requires Subscription PDF

  Pages 299-306

• The influence of crack tip shielding on fatigue crack propagation

  Anghel Cernescu

  Requires Subscription PDF

  Pages 307-313

• Variable mode-mixity during fatigue cycles – crack tip parameters determined from displacement fields measured by digital image correlation

  Michael Vormwald, Yigiter Hos, José L.F. Freire, Giancarlo L.G. Gonzáles, Jorge G. Díaz

  Requires Subscription PDF

  Pages 314-322

• 40CrMoV13.9 notched specimens under multiaxial fatigue: an overview of recent results

  S.M.J. Razavi, M. Peron, J. Torgersen, F. Berto, T. Welo

  Requires Subscription PDF

  Pages 440-446

• Fatigue assessment of steel rollers by means of the local energy

  F. Chebat, M. Cincera, S.M.J. Razavi, F. Berto, T. Welo

  Requires Subscription PDF

  Pages 447-455

• A thermography-based method for fatigue behavior evaluation of coupling beam damper

  Zhe Zhang, Jinping Ou, Dongsheng Li, Shuaifang Zhang, Junling Fan

  Requires Subscription PDF

  Pages 149-161

• Multiaxial elastoplastic cyclic loading of austenitic 316L steel

  V. Mazánová, J. Polák, V. Škorík, T. Kruml

  Requires Subscription PDF

  Pages 162-169

• Fatigue crack behaviour: comparing three-point bend test and wedge splitting test data on vibrated concrete using Paris' law

  S. Seitl, T. Thienpont, W. De Corte De Corte

  Requires Subscription PDF

  Pages 110-117

• Probabilistic prediction of fatigue damage based on linear fracture mechanics

  M. Krejsa, L. Koubova, J. Flodr, J. Protivinsky, Q. T. Nguyen

  Requires Subscription PDF

  Pages 143-159

• A probabilistic approach for multiaxial fatigue criteria

  M. Muñiz Calvente, S. Blasón, A. Fernández Canteli, A. de Jesús, J. Correia

  Requires Subscription PDF

  Pages 160-165

• Fatigue assessment by energy approach during tensile tests on AISI 304 steel

  A. Risitano, D. Corallo, E. Guglielmino, G. Risitano, L. Scappaticci

  Requires Subscription PDF

  Pages 201-215

• A study of white etching crack formation by compression-torsion experiments

  S. Averbeck, E. Kerscher

  Requires Subscription PDF

  Pages 12-18

• Stress-state dependent cohesive model for fatigue crack growth

  R. Shravan Kumar, I.S. Nijin, M. Vivek Bharadwaj, G. Rajkumar, Anuradha Banerjee

  Requires Subscription PDF

  Pages 19-25

• Prediction of the critical stress to crack initiation associated to the investigation of fatigue small crack

  D. Marhabi, N. Benseddiq, G. Mesmacque, Z. Azari, J.M. Nianga

  Requires Subscription PDF

  Pages 36-46

• Multiaxial fatigue assessment of crankshafts by local stress and critical plane approach

  M. Leitner, F. Grun, Z. Tuncali, R. Steiner, W. Chen

  Requires Subscription PDF

  Pages 47-53

• Fatigue methodology for life predictions for the wheel-rail contact area in large offshore turret bearings

  T. Lassen, Z. Mikulski

  Requires Subscription PDF

  Pages 54-60

• Fatigue modelling for gas nitriding

  H. Weil, S. Jégou, L. Barrallier

  Requires Subscription PDF

  Pages 61-66

• The effect of ply folds as manufacturing defect on the fatigue life of CFRP materials

  S. Hörrmann, A. Adumitroaie, M. Schagerl

  Requires Subscription PDF

  Pages 76-81

• Effect of molding processes on multiaxial fatigue strength in short fibre reinforced polymer

  Takahiko Sawada, Hiroshi Aoyama

  Requires Subscription PDF

  Pages 92-98

• Application of the Moment Of Inertia method to the Critical-Plane Approach

  Hao Wu, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro

  Requires Subscription PDF

  Pages 99-105

• Systematic validation of experimental data usable for verifying the multiaxial fatigue prediction methods

  J. Papuga, S. Parma, M. Ruzicka

  Requires Subscription PDF

  Pages 106-113

• Fatigue of weld ends under combined in- and out-of-phase multiaxial loading

  E. Shams, M. Vormwald

  Requires Subscription PDF

  Pages 114-120

• Comparison between SSF and Critical-Plane models to predict fatigue lives under multiaxial proportional load histories

  Manuel de Freitas, Luis Reis, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro

  Requires Subscription PDF

  Pages 121-127

• A unified rule to estimate multiaxial elastoplastic notch stresses and strains under in-phase proportional loadings

  Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Luiz Fernando Martha, Luiz Fernando Nazaré Marques

  Requires Subscription PDF

  Pages 128-134

• Fatigue crack growth of aluminium alloy 7075-T651 under non-proportional mixed mode I and II loads

  Xiaobo Yu, Ling Li, Gwenaelle Proust

  Requires Subscription PDF

  Pages 148-154

• Combined simulation of fatigue crack nucleation and propagation based on a damage indicator

  M. Springer, M. Nelhiebel, H. E. Pettermann

  Requires Subscription PDF

  Pages 155-161

• Fatigue life assessment of thin-walled welded joints under non-proportional load-time histories by the shear stress rate integral approach

  A. Bolchoun, C. M. Sonsino, H. Kaufmann, T. Melz

  Requires Subscription PDF

  Pages 162-169

• Equi-biaxial loading effect on austenitic stainless steel fatigue life

  C. Gourdin, S. Bradaï, S. Courtin, J.C. Le Roux, C. Gardin

  Requires Subscription PDF

  Pages 170-176

• A critical analysis of the Mises stress criterion used in frequency domain fatigue life prediction

  Adam Nieslony

  Requires Subscription PDF

  Pages 177-183

• Implementation of fatigue model for unidirectional laminate based on finite element analysis: theory and practice

  D. Carrella-Payan, B. Magneville, M. Hack, C. Lequesne, T. Naito, Y. Urushiyama, W. Yamazaki, T. Yokozeki, W. Van Paepegem

  Requires Subscription PDF

  Pages 184-190

• Multi-purpose fatigue sensor. Part 1. Uniaxial and multiaxial fatigue

  M.V. Karuskevich, S.R. Ignatovich, ?.P. Maslak, A. Menou, P.?. Maruschak, S.V. Panin, F. Berto

  Requires Subscription PDF

  Pages 198-204

• Multi-purpose fatigue sensor. Part 2. Physical backgrounds for damages accumulation and parameters of their assessment

  M.V. Karuskevich, S.R. Ignatovich, T.P. Maslak, A. Menou, P.?. Maruschak, S.V. Panin, F. Berto

  Requires Subscription PDF

  Pages 205-214

• Averaged strain energy density-based synthesis of crack initiation life in notched steel bars under torsional fatigue

  Filippo Berto, Alberto Campagnolo, Giovanni Meneghetti, Keisuke Tanaka

  Requires Subscription PDF

  Pages 215-223

• Development of a multiaxial fatigue damage parameter and life prediction methodology for non-proportional loading

  Sandip Suman, Alan Kallmeyer, John Smith

  Requires Subscription PDF

  Pages 224-230

• Numerical modelling of ductile damage mechanics coupled with an unconventional plasticity model

  R. Fincato, S. Tsutsumi

  Requires Subscription PDF

  Pages 231-236

• A comparison of methods for calculating notch tip strains and stresses under multiaxial loading

  M. Lutovinov, J. ?erný, J. Papuga

  Requires Subscription PDF

  Pages 237-243

• Fatigue life assessment of a non-load carrying fillet joint considering the effects of a cyclic plasticity and weld bead shape

  S. Tsutsumi, K. Morita, R. Fincato, H. Momii

  Requires Subscription PDF

  Pages 240-250

• Tensile and fatigue behaviour of as-forged AZ31B extrusion

  A. Gryguc, S.K. Shaha, H. Jahed, M. Wells, B. Williams, J. McKinley

  Requires Subscription PDF

  Pages 251-258

• Random non-proportional fatigue tests with planar tri-axial fatigue testing machine

  T. Inoue, R. Nagao, N. Takeda

  Requires Subscription PDF

  Pages 259.265

• Pressure vessels design methods using the codes, fracture mechanics and multiaxial fatigue

  Fatima Majid, Jilali Nattaj, Mohamed Elghorba

  Requires Subscription PDF

  Pages 273-280

• Creep-fatigue life evaluation of high chromium ferritic steel under non-proportional loading

  T. Morishita, Y. Murakami, T. Itoh, H. Tanigawa

  Requires Subscription PDF

  Pages 281-288

• Fatigue strength of SS400 steel under non-proportional loading

  T. Morishita, T. Takaoka, T. Itoh

  Requires Subscription PDF

  Pages 289-295

• A statistically self-consistent fatigue damage accumulation model including load sequence effects under spectrum loading

  Chen Xianmin, Sun Qin, Dui Hongna, Fan Junling

  Requires Subscription PDF

  Pages 319-330

• The effect of varying loading directions and loading levels on crack growth at 2D- and 3D-mixed-mode-loadings

  A. Eberlein, H.A. Richard

  Requires Subscription PDF

  Pages 351-358

• Crack front segmentation under combined mode I- and mode IIIloading

  A. Eberlein, H. A. Richard

  Requires Subscription PDF

  1-7

• Multiaxial fatigue of in-service aluminium longerons for helicopter rotor-blades

  A. Shanyavskiy, A. Toushentsov

  Requires Subscription PDF

  22-27

• Deformation and fatigue behaviors of carburized automotive gear steel and predictions

  Bonglae Jo, Yongbo Shim, Shahriar Sharifimehr, Ali Fatemi

  Requires Subscription PDF

  28-37