Analytical, computational and physical Models

577 Items

All Items

Geometric numerical integrators based on the Magnus expansion in bifurcation problems for non-linear elastic solids

A. Castellano, P. Foti, A. Fraddosio, S. Marzano, M. D. Piccioni

Subscription Access PDF
pages 128-138
An efficient Bouc & Wen approach for seismic analysis of masonry tower

Luca Facchini, Michele Betti

Subscription Access PDF
pages 139-149
CH of masonry materials via meshless meso-modeling

Giuseppe Giambanco, Emma La Malfa Ribolla, Antonino Spada

Subscription Access PDF
pages 150-165
Damage propagation in a masonry arch subjected to slow cyclic and dynamic loadings

J. Toti, V. Gattulli, Elio Sacco

Subscription Access PDF
pages 166-177
Numerical homogenization of piezoelectric textiles with electrospun fibers for energy harvesting

C. Maruccio, L. De Lorenzis

Subscription Access PDF
pages 49-60
A 3D mixed frame element with multi-axial coupling for thin-walled structures with damage

D. Addessi, P. Di Re

Subscription Access PDF Subscription Access PDF
pages 178-195
Limit analysis on FRP-strengthened RC members

D. De Domenico, A.A. Pisano, P. Fuschi

Subscription Access PDF
pages 209-221
Influence of boundary conditions on the response of multilayered plates with cohesive interfaces and delaminations using a homogenized approach

R. Massabò

Subscription Access PDF
pages 230-240
A finite-element approach for the analysis of pin-bearing failure of composite laminates

Michele Marino, Francesca Nerilli, Giuseppe Vairo

Subscription Access PDF
pages 241-250
The strong formulation finite element method: stability and accuracy

Francesco Tornabene, Nicholas Fantuzzi, Michele Bacciocchi

Subscription Access PDF
pages 251-265
A consistency assessment of coupled cohesive zone models for mixed-mode debonding problems

R. Dimitri, M. Trullo, G. Zavarise, L. De Lorenzis

Subscription Access PDF
pages 266-283
A new formulation for estimating maximum stress intensity factor at the mid plane of a SENB specimen: Study based on 3D FEA

S. K. Kudari, K. G. Kodancha

Subscription Access PDF
pages 419-425
Numerical investigation on stress corrosion cracking behavior of dissimilar weld joints in pressurized water reactor plants

Lingyan Zhao, He Xue, Fuqiang Yang, Yaohong Suo

Subscription Access PDF
pages 410-418
A simple beam model to analyse the durability of adhesively bonded tile floorings in presence of shrinkage

S. de Miranda, A. Palermo, F. Ubertini

Subscription Access PDF
pages 293-301
Flaw-tolerance of nonlocal discrete systems and interpretation according to network theory

A. Infuso, M. Paggi

Subscription Access PDF
pages 302-312
Crack detection in beam-like structures by nonlinear harmonic identification

Paolo Casini, Fabrizio Vestroni, Oliviero Giannini

Subscription Access PDF
pages 313-324
A data fusion based approach for damage detection in linear systems

Ernesto Grande, Maura Imbimbo

Subscription Access PDF
pages 325-333
A numerical framework for simulating fluid-structure interaction phenomena

A. De Rosis, S. de Miranda, C. Burrafato, F. Ubertini

Subscription Access PDF
pages 343-350
Mixed methods for viscoelastodynamics and topology optimization

Giacomo Maurelli, Nadia Maini, Paolo Venini

Subscription Access PDF
pages 351-363
Development of biodegradable magnesium alloy stents with coating

Lorenza Petrini, Wei Wu, Dario Gastaldi, Lina Altomare, Silvia Farè, Francesco Migliavacca, Ali Gökhan Demir, Barbara Previtali, Maurizio Vedani

Subscription Access PDF
pages 364-375
Estimate of compressive strength of an unidirectional composite lamina using cross-ply and angle-ply laminates

M. Scafè, G. Raiteri, A. Brentari, R. Dlacic, E. Troiani, M. P. Falaschetti, E. Besseghini

Subscription Access PDF
pages 399-409
Damage modelling in concrete subject to sulfate attack

N. Cefis, C. Comi

Subscription Access PDF
pages 222-229
A micropolar model for the analysis of dispersive waves in chiral mass-in-mass lattices

A. Bacigalupo, L. Gambarotta

Subscription Access PDF
pages 1-8
Quantitative estimating size of deep defects in multi-layered structures from eddy current NDT signals using improved ant colony algorithm

Bo Ye, Ming Li, Gefei Qiu, Jun Dong, Fang Zeng

Subscription Access PDF
pages 32-41
Experimental measurement and model validation of COD in pipe under bending with off-centered circumferential crack

D. Gentile, G. Iannitti, N. Bonora

Subscription Access PDF
pages 42-50
Energy dissipation and storage in iron under plastic deformation (experimental study and numerical simulation)

A. Kostina, A. Iziumova, O. Plekhov

Subscription Access PDF
pages 28-37
A theoretical model for predicting the Peak Cutting Force of conical picks

Gao Kuidong, Du Changlong, Jiang Hongxiang, Liu Songyong

Subscription Access PDF
pages 43-52
Fracture failure analysis of baseplates in a fluidic amplifier made of WC-11Co cemented carbide

H. Liu, K. Yin, J.M. Peng, Q.L. Yin

Subscription Access PDF
pages 53-65
Research on borehole stability of shale based on seepage-stress-damage coupling model

Xiaofeng Ran, Yuezhi Wang, Shanpo Jia

Subscription Access PDF
pages 74-82
Study of spatial-time inhomogeneity of serrated plastic flow Al-Mg alloy: using DIC-technique

T. V. Tretyakova, V. E. Wildemann

Subscription Access PDF
pages 83-97
Strength on cut edge and ground edge glass beams with the failure analysis method

Stefano Agnetti

Subscription Access PDF
Pages 31-40
A four-parameters model for fatigue crack growth data analysis

M. Grasso, F. Penta, P. Pinto, G.P. Pucillo

Subscription Access PDF
Pages 69-79
Mode I Stress Intensity Factors for triangular corner crack nearby intersecting of cylindrical holes

E. Salvati, P. Livieri, R. Tovo

Subscription Access PDF
Pages 80-91
Coupled FEM-DBEM method to assess crack growth in magnet system of Wendelstein 7-X

R. Citarella, M. Lepore, Joris Fellinger, Victor Bykov, Felix Schauer

Subscription Access PDF
Pages 92-103
Crack of a helicopter main rotor actuator attachment: failure analysis and lessons learned

L. Allegrucci, F. De Paolis, A. Coletta, M. Bernabei

Subscription Access PDF
Pages 104-122
Behaviour of a speargun with a novel muzzle - Comportamento di un fucile subacqueo con testata innovativa

T. Ingrassia, M. Mucera, V. Nigrelli

Subscription Access PDF
Pages 132-142
Characterisation of crack tip fields under non-uniform fatigue loading

D. Nowell, M.E. Kartal, P.F.P. de Matos

Subscription Access PDF
Pages 1-6
Combining experimental and numerical analysis to estimate stress fields along the surface crack front

A.S. Chernyatin, Yu.G. Matvienko, I.A. Razumovsky

Subscription Access PDF
Pages 15-19
Sharp contact corners, fretting and cracks

D. A. Hills, R. C. Flicek, D. Dini

Subscription Access PDF
Pages 27-35
Subsurface metals fatigue cracking without and with crack tip

Andrey Shanyavskiy

Subscription Access PDF
Pages 36-43
Near tip strain evolution under cyclic loading

J. Tong, Y.-W. Lu, B. Lin, Y. H. Tai, J.R. Yates

Subscription Access PDF
Pages 44-49
Recent developments in multi-parametric three-dimensional stress field representation in plates weakened by cracks and notches

P. Lazzarin, M. Zappalorto, F. Berto

Subscription Access PDF
Pages 61-68
Multi-parameter crack tip stress state description for estimation of fracture process zone extent in silicate composite WST specimens

Václav Veselý, Jakub Sobek, Lucie Šestáková, Petr Frantík, Stanislav Seitl

Subscription Access PDF
Pages 69-78
Is notch sensitivity a stress analysis problem?

Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro

Subscription Access PDF
Pages 79-86
Gradient enriched linear-elastic crack tip stresses to estimate the static strength of cracked engineering ceramics

Harm Askes, Luca Susmel

Subscription Access PDF
Pages 87-93
On a kinked crack model to describe the influence of material microstructure on fatigue crack growth

Andrea Spagnoli, Andrea Carpinteri, Sabrina Vantadori

Subscription Access PDF
Pages 94-101
Application of thermoelastic stress analysis for the experimental evaluation of the effective stress intensity factor

Francisco A. Díaz, Eann A. Patterson, John R. Yates

Subscription Access PDF
Pages 109-116
On numerical integration for effective stress assessment at notches

Enrico Maggiolini, Paolo Livieri, Roberto Tovo

Subscription Access PDF
Pages 117-123
Plastic zone evolution near a crack tip and its role in environmentally assisted cracking

Jesús Toribio, Viktor Kharin

Subscription Access PDF
Pages 124-129
Role of plasticity-induced crack closure in fatigue crack growth

Jesús Toribio, Viktor Kharin

Subscription Access PDF
Pages 130-137

Previous 501-550 of 577 Next