Composites

200 Items

Under this category it is possible to find the papers focused on composites

All Items

Graphene Oxide on the Microstructure and Mechanical Properties of Cement Based Composite Material

Jinchang Pang, Wang Yeming

Requires Subscription PDF Requires Subscription Visual Abstract
156-163
Influence of limestone dust and natural pozzolan on engineering properties of self-compacting repair mortars

Mohamed Ghrici, Said Choucha, Mohamed Ghrici, Ahmed Omran

Requires Subscription PDF Requires Subscription Visual Abstract
135-146
Experimental characterization and numerical modelling analyses of nano-adhesive-bonded joints

Fayssal Hadjez, Brahim Necib

Requires Subscription PDF
94-105
The Effects of Shear on Mode II Delamination

Paolo Sebastiano Valvo

Requires Subscription PDF
123-139
Experimental characterization of interlaminar fracture toughness of composite laminates assembled with three different carbon fiber lamina

Domenico Gentile

Requires Subscription PDF
Pages 155-170
Experimental study on uniaxial tensile and compressive behavior of high toughness cementitious composite

ShiYong Jiang, Shuai Tao, Wei Fei, XueYang Li

Requires Subscription PDF
Pages 33-42
Fatigue crack growth of composite patch repaired Al-alloy plates under variable amplitude loading

Fatima Zohra Seriari, Mustapha Benachour, Mohamed Benguediab

Requires Subscription PDF
Pages 43-56
Crack growth of explosive welding zirconium-steel bimetal subjected to cyclic bending

D. Rozumek, Z. Marciniak

Requires Subscription PDF
Pages 40-45
Crack onset assessment near the sharp material inclusion tip by means of modified maximum tangential stress criterion

Ondrej Krepl, Jan Klusák

Requires Subscription PDF
Pages 66-73
Pilot evaluation of a fracture process zone in a modified compact tension specimen by X-ray tomography

Jiri Klon, Stanislav Seitl, Hana Simonova, Zbynek Kersner, Ivana Kumpova, Daniel Vavrik

Requires Subscription PDF
Pages 161-169
Fracture toughness and failure mechanism of high performance concrete incorporating carbon nanotubes

Anwar Khitab, Sajjad Ahmad, Rao Arsalan Khushnood, Syed Ali Rizwan, Giuseppe Andrea Ferro, Luciana Restuccia, Mustajab Ali, Imran Mehmood

Requires Subscription PDF
Pages 238-248
Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement-based composites

H. Simonova, M. Vyhlidal, B. Kucharczykova, P. Bayer, Z. Kersner, L. Malikova, J. Klusak

Requires Subscription PDF
Pages 211-219
Dependence of mechanical characteristics from composition and structure and optimization of mechanical fracture energy of polymer composite material based on high-molecular rubbers

E. Nurullaev, A. S. Ermilov, N. Yu. Lyubimova

Requires Subscription PDF
Pages 369-377
Carbon nano-tubes in improving the mechanical property of cement-based composite materials

Xu Wu, Li Dai

Requires Subscription PDF
Pages 388-395
Fracture toughness investigations of Al6061-Graphite particulate composite using compact specimens

Saleemsab Doddamani, Mohamed Kaleemulla

Requires Subscription PDF
Pages 484-490
Nonlinear analysis of reinforced and composite columns in fire

Jaroslav Navrátil, Jaromír Kabelá?

Requires Subscription PDF
Pages 72-87
Parametric characterization of a mesomechanic kinematic caused by ondulation in fabric reinforced composites: analytical and numerical investigations

Marco Romano, Ingo Ehrlich, Norbert Gebbeken

Requires Subscription PDF
Pages 226-247
Modelling of fracture processes in laminate composite plates with embedded delamination

Mikhail A. Tashkinov

Requires Subscription PDF
Pages 248-262
Experimental investigation on fracture toughness of Al6061–graphite by using Circumferential Notched Tensile Specimens

Saleemsab Doddamani, Mohamed Kaleemulla

Requires Subscription PDF
Pages 274-281
The effect of ply folds as manufacturing defect on the fatigue life of CFRP materials

S. Hörrmann, A. Adumitroaie, M. Schagerl

Requires Subscription PDF
Pages 76-81
Implementation of fatigue model for unidirectional laminate based on finite element analysis: theory and practice

D. Carrella-Payan, B. Magneville, M. Hack, C. Lequesne, T. Naito, Y. Urushiyama, W. Yamazaki, T. Yokozeki, W. Van Paepegem

Requires Subscription PDF
Pages 184-190
Mechanical behaviour and durability of high volume fly ash cementitious composites

Usman Haider, Zdenek Bittnar, Lubomír Kopecky, Petr Bittnar, Jiri Nemecek, Asif Ali, Jaroslav Pokorny

Requires Subscription PDF
Paes 305-318
Novel magnetic composites based on water soluble unsaturated polyester resin and iron oxide nanoparticles

Petar Velev, Rayna Bryaskova

Requires Subscription PDF
272-279
Experimental investigation of effect of specimen thickness on fracture toughness of Al-TiC composites

M. S. Raviraj, C. M. Sharanaprabhu, G. C. Mohankumar

Requires Subscription PDF
360-368
Improvement of performance of ultra-high performance concrete based composite material added with nano materials

Pang Jinchang, Liu Ronggui

Requires Subscription PDF
Pages 130-138
A numerical study of two different specimen fixtures for the modified compact tension test – their influence on concrete fracture parameters

T. Holušová, H. Cifuentes, A. Fernández-Canteli, S Seit

Requires Subscription PDF
pages 242-249
Crack path and fracture surface modifications in cement composites

Sajjad Ahmad, Jean Marc Tulliani, Giuseppe Andrea Ferro, Rao Arsalan Khushnood, Luciana Restuccia, Pravin Jagdale

Requires Subscription PDF
Modified fracture properties of cement composites with nano/micro carbonized bagasse fibers

Rao Arsalan Khushnood, Sajjad Ahmad, Giuseppe Andrea Ferro, Luciana Restuccia, Jean Marc Tulliani, Pravin Jagdale

Requires Subscription PDF
Effect of fibre arrangement on the multiaxial fatigue of fibrous composites: a micromechanical computational model

Roberto Brighenti, Andrea Carpinteri, Daniela Scorza

Requires Subscription PDF
Static and dynamic experimental study of strengthened inforced short concrete corbel by using carbon fabrics, crack path in shear zone

I. Ivanova, J. Assih

Requires Subscription PDF
Analytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint

M. Ševcík, P. Hutar, A. P. Vassilopoulos, M. Shahverdi

Requires Subscription PDF
Investigation of crack paths in natural fibre-reinforced composites

S. Keck, M. Fulland

Requires Subscription PDF
A new micromechanical model of CNT-metal nanocomposites with random clustered distribution of CNTs

Chongyang Gao, Yu Lu, Y.T. Zhu

Requires Subscription PDF
pages 471-484
Inter-laminar shear stress in hybrid CFRP/austenitic steel

J. Lopes, M. Freitas, D. Stefaniak, P.P. Camanho

Requires Subscription PDF
pages 67-79
Dependence of the mechanical fracture energy of the polymeric composite material from the mixture of filler fractions

E. M. Nurullaev, A. S. Ermilov

Requires Subscription PDF
pages 120-126
Impact response of balsa core sandwiches

Nurdane Mortas, Paulo N.B. Reis, José A.M. Ferreira

Requires Subscription PDF
pages 403-408
Electrical resistivity and ultrasonic measurements during sequential fracture test of cementitious composite

V. Veselý, P. Kone?ný, P. Lehner, D. Pieszka, L. Žídek

Requires Subscription PDF
pages 263-272
Interlaminar fracture in woven carbon/epoxy laminates

Paulo N.B. Reis, José A.M. Ferreira, José D.M. Costa, António M. Pereira

Requires Subscription PDF
pages 431-438
Cf/C composites: correlation between CVI process parameters and Pyrolytic Carbon microstructure

F. Burgio, P. Fabbri, G. Magnani, M. Scafè, L. Pilloni, A. Brentari, A. Brillante, T. Salzillo

Requires Subscription PDF
pages 68-74
Improvements in self-consolidating cementitious composites by using micro carbonized aggregates

Giuseppe Andrea Ferro, Sajjad Ahmad, Rao Arsalan Khushnood, Luciana Restuccia, Jean Marc Tulliani

Requires Subscription PDF
pages 75-83
micromechanical approach for the micropolar modeling of heterogeneous periodic media

M.L. De Bellis, D. Addessi

Requires Subscription PDF
pages 37-48
Influence of boundary conditions on the response of multilayered plates with cohesive interfaces and delaminations using a homogenized approach

R. Massabò

Requires Subscription PDF
pages 230-240
A finite-element approach for the analysis of pin-bearing failure of composite laminates

Michele Marino, Francesca Nerilli, Giuseppe Vairo

Requires Subscription PDF
pages 241-250
Estimate of compressive strength of an unidirectional composite lamina using cross-ply and angle-ply laminates

M. Scafè, G. Raiteri, A. Brentari, R. Dlacic, E. Troiani, M. P. Falaschetti, E. Besseghini

Requires Subscription PDF
pages 399-409
Mechanical characterization of basalt woven fabric composites: numerical and experimental investigation

Piergiorgio Valentino, Emanuele Sgambitterra, Franco Furgiuele, Marco Romano, Ingo Ehrlich, Norbert Gebbeken

Requires Subscription PDF
pages 1-11
A review of thermographic techniques for damage investigation in composites

Laura Vergani, Chiara Colombo, Flavia Libonati

Requires Subscription PDF
pages 1-12
Research of the effectiveness of mechanical testing methods with analysis of features of destructions and temperature effects

A.V. Babushkin, D.S. Lobanov, A.V. Kozlova, I.D. Morev

Requires Subscription PDF
Pages 89-95
The numerical simulation of ceramic composites failure at axial compression

P.V. Makarov, M.O. Eremin

Requires Subscription PDF
Pages 127-137
Application of martensitic SMA alloys as passive dampers of GFRP laminated composites

M. Bocciolone, M. Carnevale, A. Collina, N. Lecis, A. Lo Conte, B. Previtali, C.A. Biffi, P. Bassani, A. Tuissi

Requires Subscription PDF
Pages 34-46
Numerical study of the response of dynamic parameters to defects in composite structures

Grigorii S. Serovaev, Valery P. Matveenko

Requires Subscription PDF
Pages 392-398

Previous 151-200 of 200